윈도우즈용 Scrivener 3.0 출시 후보 21 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 20 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 19 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 18 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 17 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 16 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 15 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 14 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 13 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 12 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 11 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 10 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 9 출시 문서

윈도우즈용 Scrivener 3.0 출시 후보 8 출시 문서

번역

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타 버전을 다운로드하거나 보고서를 게시하지 말아주세요.

현재: 베타 – 출시 후보 8, 2.9.9.8판

최신 배타 – 출시 후보 8 내려받기 연결

2.9.9.8 (64비트) | 2.9.9.8 (32비트)

(32 비트판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 이 베타를 설치하기 전에 이전 베타를 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

새로운 잠정적 베타는 여기에 게시될 거에요; 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 주제를 구독 할 수 있어요.

베타판에서 최신 베타판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

Scrivener 3에는 .NET v4.6.2 또는 그 이상의 판이 설치된 Windows 7 또는 이상이 필요해요.
갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9와 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설지할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). Scrivener 3을 설치하기 전에 Scrivener 1.9.9 바로 가기의 이름을 변경하셔서 새로운 설치가 그것을 덮어쓰는 것을 방지하게 하는 것을 권해드려요.

지금 알아두시기 바라는 것은, 윈도우즈 프로그램 목록에 가장 최근에 설치된 Scrivener 판만 보일 것이고, 작업 파일을 두번 누르기하시면 그(나중에 설치된)판으로 열기를 시도할거에요. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

버그 수정과 해결된 항목

  • 두 번 엔터로 키워드를 만들기/지우기 허용해요 [4626]
  • 열쇠말 색상 칩이 없어요 [4625]
  • 목차의 $R과 $r 자리표시자 태그를 바르지 않게 대문자화해요 [4619]
  • 견본 폴더의 항목에서 아이콘이 없어요 [4618]
  • 모든 키워드를 “*”로 검색하면 키워드를 제외한 모든 문서가 반환되요. [4617]
  • 다시 읽기 후에 프로젝트 검색이 키워드를 찾지 않아요 [4616]
  • 점검도구 주석과 각주에 대한 새 튀어오름 서식 [1435]
  • 전문 & 부속물이 잠겨 있는 것처럼 동작해요 [3963]
  • “컴파일을 완전한 원고처럼 취급하기” 설정이 동작하지 않는 것으로 보여요 [3921]
  • 빠른 참조 결과에서 문서 아이콘을 끌기 [2651]
  • 일부 도구모음 제어가 컴파일 > 구역 배치 편집기 안에서 비활성화되요 [4614]
  • 찾기가 주석과 각주의 결과를 반환해야 해요 [1619]
  • 복사하기/붙여넣기가 단락 서식을 유지하지 않아요 [4615]
  • 정규식 역참조가 첫 사례의 모든 사로잡은 문자로 대체해요 [4485]
  • 주석에서 문자 편집 단축키가 비활성화되거나 일치하지 않아요 [4607]
  • 색인이 다른 작업을 지우면 작업이 자동 저장되지 않을 거에요 [4606]
  • 단축키로 가져온 파일은 단축키로 복사해야 해요 [4563]
  • 웹페이지의 제한된 탐색 허용이 계속 재설정해야해요 [4604]
  • 선택지 > 정정에 자료감지 선택지를 추가했어요 [3549]
  • 순간촬영을 구체화했어요 [1815]
  • 스크리브너에서 웹페이지 불러요 [2326]
  • 웹 보기 연결을 누르면 브라우저로 누름을 보내요 [3772]
  • 다른 편집기에서 모음아닌 항목을 여는 선택지가 없어요 [3655]
  • 모든 스마트 인용 검색을 직선으로 바꿀 수 없어요 [782]
  • 직선 인용으로 실패한 검색자 [4291]
  • 제본철의 견본에서 신규가 폴더에 대하여 깨져요 [4603]
  • 퀵타임 5.15.0 x64 설치 내부에 vcruntime140_1.dll가 없어요 [4602]
  • 여러 줄 스크리브닝 제목이 보이지 않게 스크롤해요 [3116]
  • 테마를 이용할 때 도구모음 배경 색상이 깨져요 [4599]
  • 주석 튀어오름이 작성 모드에서 보이지 않아요 [4600]
  • 책갈피 미리보기 영역이 PDF와 다른 파일을 일반 문서로 불러요 [4601]
  • 설치자의 활성화된 보기 배율이 모호해요 [2485]
  • 예제 문서가 검정 강조 표시를 같이 가져와요 [2176]
  • 다른 편집기에서 열기 단축키를 이용하여 분할 방향을 뒤집어요 [4166]
  • Alt+Right-Click으로 사용자 정의 아이콘 메뉴에 접근하여도 분할을 열어요 [4470]
  • KindleGen 기록 파일 선택지가 기록 파일을 만들지 않아요 [3943]
  • 연결하지 않고 연결 [4597]
  • 표 하위메뉴가 여러 셀을 선택하였을 때 상황 메뉴에서 비활성화되요 [4518]
  • 완전히 동작하는게 가능하지 않으면 점검도구에서 주석을 여는 선택지가 있어요 [4595]
  • 주석이 docs로 전환 후에 작성 모드에서 불려오지 않아요 [4594]
  • 기본 주석 문자가 모든 만드는 법에서 사전 선택되어 있지 않아요 [4593]
  • 작성 모드가 깜빡이고 주 화면으로 돌아와요 [4592]
  • 삽입 메뉴 단추가 문서를 전환한 후에 활성해제되요 [4591]
  • 선택지 – 왼쪽구역이 크기조정될 수 없어요 [4587]
  • 정보 안내문의 모서리 굴림이 고르지 않아요 [4585]
  • 문서 대상 구역에서 키보드 탐색이 헛갈려요 [4583]
  • 단어 세알림 양식의 모든 내용을 지우는 것이 0이어야만 해요 [4582]
  • 이용환경: 작업 대상 문자가 잘려요 [4580]
  • 자름 수준을 1씩 강조표시하는 구조별 기본 유형이 있어요 [4577]
  • 문서 대상 바닥글 아이콘이 일치하지 모둠에 않아요 [4574]
  • 작성 모드로의 빠른 전환이 스크리브너와 충돌해요 [4572]
  • 이용환경: 각주 구분자가 지원되지 않은 파일 유형에서 사라져요 [4571]
  • 두 번째 작업을 파일 탐색기 또는 작업 표시줄에서 열 수 없어요 [4570]
  • 두 번째 마당을 실행하려는 시도가 작업 오류 안내문을 줘요 [4569]
  • 고DPI: 웹페이지가 편집기의 위쪽 반에서만 불려져요 [4568]
  • 고DPI: 형식막대 세로 여백 [4567]
  • 붙여넣을 때 웹 이미지를 내려받아요 (https 포함) [4566]
  • 사용자 정의 기초자료 목록에서 끌고 놓기하면 항목을 잃을 수 있어요 [4511]
  • 충돌 – svg가 있는 웹사이트 가져오기 / 붙여넣기 [4492]
  • 폰테인 가져오기가 필요하지 않은 빈 줄을 벗겨내지 않아요 [4397]
  • 디스크에 연결된 편집기에 이미지가 삽입하면 잘 못된 크기가 되요 [4343]
  • 인라인 주석 또는 잘린 각주를 선택해요 [4316]
  • 구역 배치 확인란의 수정이 탭 자료를 되돌려요 [4186]
  • 모든 개정 제거가 일련의 명령을 실행취소 더미에 삽입해요 [3673]
  • 주석 방울이 “색상 없이” 선택지를 선택하면 사라져요 [3177]
  • 쌓이는 콕보드에 섹션당 번호 매기기를 추가했어요 [3173]
  • 웹페이지의 쪽 원본 보기가 더 이상 동작하지 않아요 [3016]
  • 주석과 인라인 각주가 빈 줄 다음이 포함되요 [2779]
  • 빠른 참조와 책갈피 도구모음 아이콘에 끌고 놓기 [2652]
  • 기 책갈피 제목이 겹쳐요 [2550]
  • 주석이 점검도구가 다른 편집기로 고정되었을 때 사라져요 [2500]
  • 보기\콕보드 선택지\배치 메뉴를 추가했어요 [2428]
  • 수정됨: 특수 폴더가 빠른 참조에서 열리지 않아야만 해요 [2381]
  • 빠른 참조창의 주석 [2350]
  • .fountain 외부 책갈피를 .txt로 미리보기를 허용해요 [2325]
  • 다른 편집기 기록의 뒤로/앞으로가 활성 편집기를 바꿔서는 안 되요 [1334]
  • 웹 페이지에서 일반으로 전환이 동작하지 않아요 [796]
  • 순간촬영 관리자에 비교 선택지가 없어요 [3551]
  • 순간 쵤영 관리자와 점검도구에서 순간 촬영의 여러 선택을 구현했어요 [1908]
  • 정규식 운반자 반환 & 새 줄(\r & \n)을 철저한 찾기를 구현했어요
  • PDF 출력에서 목차와 페이지 마지막 각주를 수정했어요
  • 비활성화한 메뉴 문자가 테마에서 흐리가 나타나요
  • 제본철 자식 아이콘 보이기/숨기기가 테마에서 선택할 때 보이지 않아요

스크리브너가 정지할 수 있는 2개의 버그(아래에 있음), 그리고 자료 손실을 일으키는 버그가 없다는 것을 인식하고 있으니, 스크리브너를 정지시키거나 자료 손실의 원인이 될 수 있는 다른 버그를 인식하였다면, 알려주시기 바래요. 알고 있는 충돌 버그는 다음과 같아요:-

표에서 셀 병합이 확실한 조건 아래에 충돌할 수 있어요

출시후보8의 고DPI판을 사용하기 원하면 여기에서 내려받을 수 있어요: 2.9.9.8 (64비트 고DPI) | 2.9.9.8 (32비트 고DPI). 고DPI판은 스크리브너 코드가 같지만, 마이크로소프트 윈도우즈 배율조정을 더 낫게 처리하기 위해 최신 Qt 5.15 C++ 뼈대로 컴파일했어요.

화면 보기 배율에서 너무 큰 확실한 대화 상자(컴파일과 선택지와 같은)를 찾아주어 어떻게 동작하는지에 대한 의견에 특별히 감사해요. 고-DPI 업데이트는 자체 시험에서 확실히 개선되었고, 여러분에게도 그랬으면 좋겠어요!

베타 출시 후보 8은 2020년 8월 15일까지 유효해요.

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020년 7월 12일

원문

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta – Release Candidate 8, version 2.9.9.8

Latest Beta – Release Candidate 8 Download Link

2.9.9.8 (64-bit) | 2.9.9.8 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing this Beta. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

Bug Fixes and Resolved Items

  • Allow Creating/Deleting Keywords with double Enter [4626]
  • Keyword color chips missing [4625]
  • Inorrect capitalization for $R and $r placeholder tags in TOC [4619]
  • Icons missing from items in Templates folder [4618]
  • Searching for all keywords with “*” returns all documents without keywords. [4617]
  • Project search does not find keywords after reload [4616]
  • New popover style for inspector comments and footnotes [1435]
  • Front & Back Matter act as though locked [3963]
  • “Treat compile group as complete manuscript” setting does not appear functional [3921]
  • Drag document icons from Quick Search results [2651]
  • Some toolbar controls are disabled inside the Compile > Section Layout editor [4614]
  • Find should return results within comments and footnotes [1619]
  • Copy/Paste does not preserve paragraph formatting [4615]
  • RegEx backreference replaces all captured text with first instance [4485]
  • Text editing shortcuts disabled or inconsistent in comments [4607]
  • Project will not be auto-saved if indexes are dropped from another projects [4606]
  • Files imported as shortcuts should copy as shortcuts [4563]
  • Allow limited navigation in webpages must be continually reset [4604]
  • Add Data-Detection Options to Options > Corrections [3549]
  • Snapshot refinements [1815]
  • Loading Web Pages in Scrivener [2326]
  • Clicking on links in web view should send clicks to browser [3772]
  • Option to open non-group items in other editor is missing [3655]
  • Cannot Replace All smart quotes searching with straight [782]
  • Search operators failing with straight quote [4291]
  • New from Template in Binder is broken for folders [4603]
  • Missing vcruntime140_1.dll inside the Qt 5.15.0 x64 installation [4602]
  • Multi-line Scrivenings titles scroll invisibly [3116]
  • Broken ToolBar Background colors when using Themes [4599]
  • Comment popups not appearing in Composition Mode [4600]
  • Bookmarks Preview area loads PDF and other files as plain text [4601]
  • Installer fuzzy with display scaling enabled [2485]
  • Sample document imports with black highlighting [2176]
  • Use of shortcut to open in other editor flips split orientation [4166]
  • Alt+Right-Click to access custom icon menu also opens split [4470]
  • KindleGen log file option does not produce log file [3943]
  • Linking Without Linking [4597]
  • Table submenu disabled in context menu when multiple cells selected [4518]
  • Option to open comments in inspector if possible does not fully work [4595]
  • Comments do not load in composition mode after switching docs [4594]
  • Default comment text not preselected in all creation methods [4593]
  • Composition mode flickers and returns to main window [4592]
  • Insert menu button disables after switching documents [4591]
  • Options – left-pane can’t be resized [4587]
  • Info Messages have jagged rounded corners [4585]
  • Confusing keyboard navigation in Document Target panel [4583]
  • Deleting all contents of word count fields should set to zero [4582]
  • UI: Project Targets letter clipped [4580]
  • Default Type by Structure highlighting offsets levels by 1 [4577]
  • Document target footer icon inconsistent for groups [4574]
  • Rapid toggling of composition mode crashes Scrivener [4572]
  • UI: Footer divider missing for unsupported file types [4571]
  • Cannot open second project via File Explorer or Task Bar [4570]
  • Attempt to launch second instance gives project error message [4569]
  • HiDPI: Webpages only load in top half of editor[] [4568]
  • HiDPI: vertical padding around format bar [4567]
  • Download web images on paste (including https) [4566]
  • Drag and drop in custom metadata lists can lose items [4511]
  • CRASH – Importing / pasting websites with svg [4492]
  • Fountain import does not strip out unnecessary empty lines [4397]
  • images inserted into the editor as linked to disk have wrong size [4343]
  • Select inline annotation or footnote is offset [4316]
  • Modification of section layout checkboxes reverts tab data [4186]
  • Remove All Revisions inserts a sequence of commands into undo stack [3673]
  • Annotation bubble disappears when “Do not color” option ticked [3177]
  • Add per-section numbering to stacked corkboard [3173]
  • View Page Source on webpages no longer works [3016]
  • Annotation and inline footnote include following empty lines [2779]
  • Drag and drop to Quick Reference and Bookmark toolbar icons [2652]
  • Long bookmark titles overlap [2550]
  • Comments lost when inspector locked to other editor [2500]
  • Add View\Corkboard Options\Layout menu [2428]
  • Special folders should not open in Quick Reference [2381]
  • Comments in Quick Reference windows [2350]
  • SUGGESTION: Allow .fountain external bookmarks to preview as .txt [2325]
  • Back/Forward in Other Editor History shouldn’t change active editor [1334]
  • Convert web page to text nonfunctional [796]
  • Snapshot Manager missing Compare options [3551]
  • Implement multiple selection of snapshots within the Snapshot Mgr & Inspector [1908]
  • Implement Regex Carriage return & Newline (\r & \n) find capability thoroughout
  • Fix TOC and end of page footnotes in PDF printing
  • Disabled menu text is blurry in Themes
  • Binder show/hide children icon not visible when selected in Themes

We are aware of one bug (listed below) that can hang Scrivener, and zero bugs that cause data loss, so if you are aware of any other bugs that can hang Scrivener, or cause data loss, please let us know. The only crash bug we know about is:-

Merging cells in table can crash under certain conditions

If you would like to try a HiDPI version of RC8 you can download it here: 2.9.9.8 (64-bit HiDPI) | 2.9.9.8 (32-bit HiDPI). The HiDPI version is the same Scrivener code, but compiled with the latest Qt 5.15 C++ framework that is supposed to better address Microsoft Windows scaling.

We’d especially appreciate feedback on how this works for those of you who have found certain dialogs (such as compile and options) too large with your screen’s display scaling. The high-DPI updates have made significant improvements in our testing, and we’re hoping you see the same!

Beta Release Candidate 8 expires 15th Aug 2020.

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
July 12th 2020

윈도우즈용 Scrivener 3.0 출시 후보 7 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 출시 후보 6  출시 문서 에서 바뀐 것은 버그 수정 과 해결된 항목 부분이네요. 이제 출시 후보라 그런지 문제가 완전히 해결되었는지 확인하네요.

윈도우즈용 Scrivener 3.0 출시 후보 6 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 출시 후보 5  출시 문서 에서 바뀐 것은 버그 수정 과 해결된 항목 부분이네요. 이제 출시 후보라 그런지 문제가 완전히 해결되었는지 확인하네요.

윈도우즈용 Scrivener 3.0 출시 후보 5 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 출시 후보 4  출시 문서 에서 바뀐 것은 버그 수정 부분이네요. 이제 출시 후보라 그런지 수정되는 버그가 확연히 줄었네요.

윈도우즈용 Scrivener 3.0 출시 후보 4 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 출시 후보 3  출시 문서 에서 바뀐 것은 버그 수정 부분이네요. 이제 출시 후보라 그런지 수정되는 버그가 확연히 줄었네요.

윈도우즈용 Scrivener 3.0 출시 후보 3 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 출시 후보 2  출시 문서 에서 바뀐 것은 버그 수정 부분이네요. 이제 출시 후보라 그런지 수정되는 버그가 확연히 줄었네요.

윈도우즈용 Scrivener 3.0 출시 후보 2 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 출시 후보 1  출시 문서 에서 바뀐 것은 버그 수정 부분이네요. 이제 출시 후보라 그런지 수정되는 버그가 확연히 줄었네요.

윈도우즈용 Scrivener 3.0 출시 후보 1 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 44 출시 문서 에서 바뀐 것은 버그 수정 부분이네요. 이제 출시 후보라 그런지 수정되는 버그가 확연히 줄었네요.

윈도우즈용 Scrivener 3.0 베타 44 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 43 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

윈도우즈용 Scrivener 3.0 베타 43 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 42 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

윈도우즈용 Scrivener 3.0 베타 42 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 41 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

윈도우즈용 Scrivener 3.0 베타 41 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 40 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

윈도우즈용 Scrivener 3.0 베타 40 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 39 출시 문서 에서 바뀐 것은 버그 수정과 그 직후의 간단한 설명 부분이네요.

윈도우즈용 Scrivener 3.0 베타 39 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 38 출시 문서 에서 바뀐 것은 버그 수정과 그 직후의 간단한 설명 부분이네요.

윈도우즈용 Scrivener 3.0 베타 38 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 37 출시 문서 에서 바뀐 것은 버그 수정과 그 직후의 간단한 설명 부분이네요.

Scrivener 3.0 베타 38 (내려받기 연결과 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 38, 2.9.0.38판

최신 38판 내려받기 연결

2.9.0.38 (64비트) | 2.9.0.38 (32비트)

중요: High-DPI가 아닌 모니터의 문자 레이아웃 계산이 변경되었어요. HighDPI 이외의 모니터를 사용하는 경우 베타 38을 설치하고 시험하기 전에 베타 36을 사용하여 프로젝트를 백업하세요. HighDPI 이외의 모니터를 사용하고 텍스트 레이아웃 문제가 발생하는 경우 저희에게 알려주세요.

베타 36-내려받기 연결

2.9.0.36 (64비트) | 2.9.0.36 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 38를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설지할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 36에서 베타 37으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • DPI, 포인트 및 Twip 변환을 위한 새로운 알고리즘 구현
  • 문자 선택 강조가 개선되었어요
  • PDF 컴파일에서 문자가 잘려요
  • 편집기가 인치당 문자를 바르지 않게 표시해요 [4318]
  • 스크리브닝 모드 사용시 대규모 메모리 누수 [4317]
  • 일반 문서 컴파일 출력에 대한 이용자 정의 확장 설정이 작동하지 않아요 [3864] [4311]
  • 대본 형식으로 변화하는 기능이 추가되었어요 [846]
  • 스크립트 형식 변환시 스크리브너가 중단됨 [4055]
  • 문자와 이미지가 PDF 컴파일에서 여러 페이지로 나뉘어요 [3796]
  • PDF 컴파일에서 스크립트 요소가 잘못된 들여 쓰기를 사용해요 [4257]
  • 문자와 이미지가 PDF 컴파일에서 여러 페이지로 나뉘어요 [3796]
  • 편집기에서 눈금자가 문자와 함께 확대/축소되지 않아요 [543]
  • 스크롤 휠을 사용할 때 고정 너비 편집이 확대되지 않아요 [4295]
  • 바닥글에 스크립트 요소가 바르지 않게 보고되었어요 [3200]
  • 스크립트 설정 탭의 동작이 비르지 않게 비활성화되었어요 [4288]
  • 컴파일 – 서식 – 원시 마크업이 작동하지 않는 것으로 취급되었어요 [3970]
  • 폰태인 해석기가 개선되었어요 [4324]
  • 일반 문서 컴파일러 서식 구성자의 확장 항목이 작동하지 않아요 [3864]
  • 리턴으로 줄이 바뀌기 전에 콜론을 추가하는 선택지가 스크립트 설정에 추가되었어요 [3967]
  • 들여오기한 폰태인 파일이 비공백 구간을 사용해요 [4297]
  • 눈금자가 1/8 대신에 1/6인치 표시를 사용해요 [1257]
  • 컴파일하고 내보내는 중에 대본쓰기 요소를 서식으로 추가하였어요 [4283]
  • 대문자 자리 표시자는 대문자로 대체해야해요 [4252]
  • 컴파일 배치 미리보기 타일에 제목이 누락되어요 [4258]
  • PDF 설정 컴파일 형식 창 구현하였어요 [4240]
  • 들여오기 한 레거시 컴파일 사전 설정을 서식 구성자 중의 하나를 취해야 해요 [4287]
  • 레거시 컴파일 사전 구성을 가져오는 것은 이용자가 만들것이어야 해요 [4285]
  • 서식해제된 이탤릭 표지가 이탤릭 문자로 서식화된 것으로 추가되었어요 [4242]
  • 주요 도구 모음과 서식 막대 아이콘의 크기를 조절하는 선택지가 추가되었어요 [3917]
  • 마크다운 기반 서식에 대해 추가된 확장 이름표가 바르지 않게 읽어져요 [4281]
  • 비영어 언어에 대하여 i > I로 대문자화하지 않아요 [4323]
  • 윈도우용 스크리브너 3용 자습서를 만들어요 [3848]
  • 설정 > 외관 > 바인더 선택지가 상자 안에서 굵은 글꼴 선택지를 사용해요 [3839]
  • 현재 줄 강조하기 빠른 참조 선택지가 추가되었어요
  • 스크래치 패드 인터페이스 이름이 조정되었어요 [3714]
  • <$sectiontitle> 자리 표시자가 작동하지 않아요 [4037]
  • 일부 설정 변경에서 “스크리브너가 재시작되어야 할 필요가 있습니다”가 불필요하게 보여짐 [3812]

베타 37에서 베타 38로의 긴급수정은 다음과 같아요.

  • 새로운 변경 사항에 대한 추가 시험이 필요하므로 깜박이는 커서 변경 사항을 되돌렸어요.
  • 빠른 검색 팝업 메뉴가 사라지는 문제를 해결했어요.
  • 사람들이 필요로하는 경우 문서 들여 쓰기를 이전 값에서 새 값으로 변환하는 옵션이 추가되었어요. 메뉴 명령은 “문서 > 변환 > 이전방식의 들여 쓰기로”에요. 공식 출시에서는 제거될 거에요.
  • 설정 > 외관 > 점검도구와 노트 > 색상이 수정되었어요.

베타 38은 2020년 3월 1일에 만료되요.

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 2 월 12 일

원문

Scrivener 3.0 Beta 38 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 38, version 2.9.0.38

Latest Beta 38 Download Link

2.9.0.38 (64-bit) | 2.9.0.38 (32-bit)

IMPORTANT: We have changed the text layout calculations for Non-HighDPI monitors. If you use a Non-HighDPI monitor, please backup your project using Beta 36, before installing and testing Beta 38. In case you are using a Non-HighDPI monitor and experience text layout problems, please let us know.

Beta 36 – Download Link

2.9.0.36 (64-bit) | 2.9.0.36 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 38. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 36 to Beta 37 are listed below.

Bug Fixes

  • Implemented new algorythm for DPI, Points and Twip conversions
  • Improved text selection highlighting
  • Cut-off text in PDF Compile
  • Editor displays incorrect characters per inch [4318]
  • Major memory leak using Scrivenings mode [4317]
  • The custom extension setting for plain-text compile output doesn’t work [3864] [4311]
  • Add ability to convert script format [846]
  • Converting script formats hangs Scrivener [4055]
  • Text and images split across pages in PDF compile [3796]
  • Script elements use wrong indentation in PDF compile [4257]
  • The Appearance preference pane overhaul to closer mactch Mac [4312]
  • Ruler doesn’t zoom with text in editor [543]
  • The edit fixed width will not zoom when using the scroll wheel [4295]
  • Script elements incorrectly reported in footer [3200]
  • Script Settings Tab Behavior disabled incorrectly [4288]
  • Compile – Styles – Treat as raw markup is nonfunctional [3970]
  • Fountain Parser improvements [4324]
  • Extension field in plain-text compiler format designer does not function [3864]
  • Script Settings add option to add colon before return [3967]
  • Imported Fountain files use non-breaking spaces [4297]
  • Ruler uses 1/6 inch markings instead of 1/8th [1257]
  • Add scriptwriting elements as styles during compile and export [4283]
  • Uppercase placeholders should be replaced with uppercase text [4252]
  • Compile Layout preview tiles missing titles [4258]
  • Implement the PDF Settings Compile Format Pane [4240]
  • Imported legacy compile presets should take one to the format designer [4287]
  • Import legacy compile preset should be on-demand only [4285]
  • Unstyled italic markers added to styled italic text [4242]
  • Add an Option to adjust the size of the Main Toolbar and the Format Bar icons [3917]
  • Appended extension label reads incorrectly for Markdown-based formats [4281]
  • Do not capitalize i > I for non English languages [4323]
  • Create Tutorial for Scrivener for windows 3 [3848]
  • Added option Settings > Appearance > Binder – use bold font options for containers [3839]
  • Added option Quick Reference Highlight current line
  • Scratchpad interface name adjustments [3714]
  • <$sectiontitle> Placeholder not working [4037]
  • “Scrivener needs to be restarted” shown unnecessarily from some Options changes [3812]

The Hot Fixes from Beta 37 to Beta 38 are listed below

  • Reverts the blinking cursor changes, as the new changes need further testing.
  • Fixed disappearing Quick Search popup menu.
  • Added an option to convert documents indentation from old values to new values, in case folks need it badly. The menu command is “Documents > Convert > to Legacy Indentation“. It will be removed for the official release.
  • Fixed Options > Appearance > Inspector & Notes > Colors.

Beta 38 expires 1st March 2020.

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Feb 12th 2020

윈도우즈용 Scrivener 3.0 베타 37 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 36 출시 문서 에서 바뀐 것은 버그 수정과 그 직후의 간단한 설명 부분이네요.

Scrivener 3.0 베타 37 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 37, 2.9.0.37판

최신 37판 내려받기 연결

2.9.0.37 (64비트) | 2.9.0.37 (32비트)

중요: High-DPI가 아닌 모니터의 문자 레이아웃 계산이 변경되었어요. HighDPI 이외의 모니터를 사용하는 경우 베타 37을 설치하고 시험하기 전에 베타 36을 사용하여 프로젝트를 백업했는지 확인하세요. HighDPI 이외의 모니터를 사용하고 문자 배열 문제가 발생하는 경우 이러한 문자 배열 변경을 자동으로 처리하는 방법을 제공 할 때까지 베타 36으로 돌아갈 수 있어요.

베타 36-내려받기 연결

2.9.0.36 (64비트) | 2.9.0.36 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 37를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설지할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 36에서 베타 37으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • DPI, 포인트 및 Twip 변환을 위한 새로운 알고리즘 구현
  • 문자 선택 강조가 개선되었어요
  • PDF 컴파일에서 잘린 텍스트
  • 편집기가 인치당 문자를 바르지 않게 표시해요 [4318]
  • 스크리브닝 모드를 사용에 메모리 누수가 큼 [4317]
  • 일반 문서 컴파일 출력에 대한 이용자 정의 확장 설정이 작동하지 않아요 [3864] [4311]
  • 대본 형식으로 변화하는 기능이 추가되었어요 [846]
  • 스크립트 형식 변환시 스크리브너가 중단됨 [4055]
  • 문자와 이미지가 PDF 컴파일에서 여러 페이지로 나뉘어요 [3796]
  • PDF 컴파일에서 스크립트 요소가 잘못된 들여 쓰기를 사용해요 [4257]
  • 외관 환경설정 영역 맥과 비슷하게 일치하도록 검사하였어요 [4312]
  • 편집기에서 눈금자가 문자와 함께 확대/축소되지 않아요 [543]
  • 스크롤 휠을 사용할 때 고정폭 편집이 확대되지 않아요 [4295]
  • 바닥글에 스크립트 요소가 바르지 않게 보고되었어요 [3200]
  • 스크립트 설정 탭의 동작이 비르지 않게 비활성화되었어요 [4288]
  • 컴파일 – 서식 – 원시 마크업이 작동하지 않는 것으로 취급되었어요 [3970]
  • 폰태인 해석기가 개선되었어요 [4324]
  • 일반 문서 컴파일러 서식 구성자의 확장 항목이 작동하지 않아요 [3864]
  • 리턴으로 줄이 바뀌기 전에 콜론을 추가하는 선택지가 스크립트 설정에 추가되었어요 [3967]
  • 들여오기한 폰태인 파일이 비공백 구간을 사용해요 [4297]
  • 눈금자가 1/8 대신에 1/6인치 표시를 사용해요 [1257]
  • 컴파일하고 내보내는 중에 대본쓰기 요소를 서식으로 추가하였어요 [4283]
  • 대문자 자리 표시자는 대문자로 대체해야해요 [4252]
  • 컴파일 배치 미리보기 타일에 제목이 누락되어요 [4258]
  • PDF 설정 컴파일 서식 창을 구현하였어요 [4240]
  • 들여오기한 레거시 컴파일 사전 구성은 서식 구성자 중의 하나를 취해야 해요 [4287]
  • 레거시 컴파일 사전 구성을 가져오는 것은 이용자가 만들것이어야 해요 [4285]
  • 서식해제된 이탤릭이 이탤릭으로 서식화되어 추가되요 [4242]
  • 주요 도구 모음과 서식 막대 아이콘의 크기를 조절하는 선택지가 추가되었어요 [3917]
  • 마크다운 기반 서식에 대해 추가된 확장 이름표가 바르지 않게 읽어져요 [4281]
  • 비영어 언어에 대하여 i > I로 대문자화하지 않아요 [4323]
  • 윈도우용 스크리브너 3용 자습서를 만들어요 [3848]
  • 설정 > 외관 > 바인더의 상자에 대하여 굵은 글꼴 선택지를 추가하였어요 [3839]
  • 현재 줄 강조하기 빠른 참조 선택지를 추가하였어요
  • 스크래치 패드 이용환경 이름 조정 [3714]
  • <$sectiontitle> 자리 표시자가 작동하지 않아요 [4037]
  • 일부 설정 변경에서 “스크리브너가 재시작되어야 할 필요가 있습니다”가 불필요하게 보여짐 [3812]

이 베타는 2020년 2월 23일까지만 실행될 거에요. 이 짧은 이용기간이 누군가에게는 귀찮을 것이라는 걸 알아요. 하지만, 특별히 이번 출시에서 DPI들 > 뒤틀림 > 지점과 그 반대의 경우가 얼마나 다양한지 검증되었어요. 오류를 소개하는 경우에 보존기간을 제한하는것이 얼마나 중요한지 몰라요. 우리가 스크리브너를 개발하는데 이용하는 퀵타임 C++ 프레임워크의 이 복합적이고 길게 지속되는 문제들이 끝내 해결되리라고 생각되요.

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020년 2월 11일

원문

Scrivener 3.0 Beta 37 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 37, version 2.9.0.37

Download Link

2.9.0.37 (64-bit) | 2.9.0.37 (32-bit)

IMPORTANT: We have changed the text layout calculations for Non-HighDPI monitors. In case you are using a Non-HighDPI monitor and experience text layout problems, you can go back to Beta 36 until we provide a way to handle this change of text layout automatically for you.

Beta 36 – Download Link
2.9.0.36 (64-bit) | 2.9.0.36 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 37. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side
It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 36 to Beta 37 are listed below.

Bug Fixes

  • Implemented new algorythm for DPI, Points and Twip conversions
  • Improved text selection highlighting
  • Cut-off text in PDF Compile
  • Editor displays incorrect characters per inch [4318]
  • Major memory leak using Scrivenings mode [4317]
  • The custom extension setting for plain-text compile output doesn’t work [3864] [4311]
  • Add ability to convert script format [846]
  • Converting script formats hangs Scrivener [4055]
  • Text and images split across pages in PDF compile [3796]
  • Script elements use wrong indentation in PDF compile [4257]
  • The Appearance preference pane overhaul to closer mactch Mac [4312]
  • Ruler doesn’t zoom with text in editor [543]
  • The edit fixed width will not zoom when using the scroll wheel [4295]
  • Script elements incorrectly reported in footer [3200]
  • Script Settings Tab Behavior disabled incorrectly [4288]
  • Compile – Styles – Treat as raw markup is nonfunctional [3970]
  • Fountain Parser improvements [4324]
  • Extension field in plain-text compiler format designer does not function [3864]
  • Script Settings add option to add colon before return [3967]
  • Imported Fountain files use non-breaking spaces [4297]
  • Ruler uses 1/6 inch markings instead of 1/8th [1257]
  • Add scriptwriting elements as styles during compile and export [4283]
  • Uppercase placeholders should be replaced with uppercase text [4252]
  • Compile Layout preview tiles missing titles [4258]
  • Implement the PDF Settings Compile Format Pane [4240]
  • Imported legacy compile presets should take one to the format designer [4287]
  • Import legacy compile preset should be on-demand only [4285]
  • Unstyled italic markers added to styled italic text [4242]
  • Add an Option to adjust the size of the Main Toolbar and the Format Bar icons [3917]
  • Appended extension label reads incorrectly for Markdown-based formats [4281]
  • Do not capitalize i > I for non English languages [4323]
  • Create Tutorial for Scrivener for windows 3 [3848]
  • Added option Settings > Appearance > Binder – use bold font options for containers [3839]
  • Added option Quick Reference Highlight current line
  • Scratchpad interface name adjustments [3714]
  • <$sectiontitle> Placeholder not working [4037]
  • “Scrivener needs to be restarted” shown unnecessarily from some Options changes [3812]

Beta 37 expires 23rd Feb 2020. We know this short expiry date can be annoying to some; however, particularly in this release with overhauled calculations for how various DPIs > to twips > to points and vice versa, it’s important we limit the shelf-life in case we introduce errors. We believe we have finally resolved this complex and long standing issue inherent in the Qt C++ framework we use to build Scrivener.

A Note on Suggestions
To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Feb 11th 2020

윈도우즈용 Scrivener 3.0 베타 36 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 35 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 36 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 36, 2.9.0.36판

내려받기 링크

2.9.0.36 (64비트) | 2.9.0.36 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 36를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설지할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 35에서 베타 36으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 맥과 일치하도록 문서 기능을 끌어서 놓기 [4268]
  • 맥과 일치하도록 스크립트 작성 설정, 파일 형식 및 GUI [4282]
  • 스크립트 작성 간격 수정 및 기능 키 수정
  • 맥 작업에서 BBC 라디오 장면 요소가 손실 됨 [4256]
  • Windows에서 Stage Play US 요소가 인식되지 않음 [4278]
  • 맥에서 BBC 녹화 드라마 캐릭터 요소가 손실 됨 [4263]
  • RTF에서 스크립트 요소에 대한 스타일로 스크립트 스타일 내보내기 구현
  • 프로젝트 컴파일 설정이 존재하는 경우에만 레거시 컴파일 설정 가져 오기 대화 상자 자동 열기 [4284]
  • “Tufte (도서)” MMD > LaTex 문서 클래스 추가 [4277]
  • LaTeX 선택지 “이용자 정의” 설정은 새로운 MMD6 명명 규칙을 사용해야해요 [4028]
  • MMD 출력 디렉토리가 이제 맥 사양에 따라 생성되요.
  • Pandoc / Latex 형식 내보내기
  • 마크 다운 컴파일 폴더 생성과 재사용 [3451]
  • 서식 재지정이 이제 맥 사양과 일치
  • 섹션 배열 > 제목 옵션에 배치 된 경우 자리 표시자가 처리되지 않음 [4238]
  • 대소 문자 자리 표시자가 이제 올바르게 교체되었어요.
  • <$parentposition> 자리 표시자가 컴파일 대체에서 무시 됨 [4276]
  • 본문 내에서 작업 교체가 실패 함 [4271]
  • 첫 줄 들여쓰기 기능 평탄화 맥 사양과 일치하지 않음
  • 파란색 바인더 헤더와 밑줄은 별도의 상태를 나타내야만 해요 [2737]
  • 아포스트로피 처리에 대한 맞춤법 검사 문제 [3459]
  • 스마트 구두점을 멍청이 설정으로 변환해도 저장되지 않음 [4250]
  • 갱신 된 파일을 동기화 한 후 갱신 된 문서 모음이 비어 있음 [2387]
  • 바닥글의 단어/문자 유형 변경 지연 [4270]
  • 빈 개요자에서 새 항목을 만들 수 없음 [4203]
  • 파일 -> 인쇄와 파일-> 인쇄 미리보기로 인해 충돌이 발생 함 [4262]
  • 컴파일 교체 성능이 크게 향상되었어요

베타 36은 2020 년 2 월 중순에 만료됩니다.

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 1 월 28 일

원문

Scrivener 3.0 Beta 36 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 36, version 2.9.0.36

Download Link

2.9.0.36 (64-bit) | 2.9.0.36 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 36. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 35 to Beta 36 are listed below.

Bug Fixes

  • Invert drag and drop of a document functionality to match Mac [4268]
  • Overhaul Scriptwriting settings, file format and GUI to match Mac [4282]
  • Scriptwriting spacing fixes and functional key fixes
  • BBC Radio Scene element lost from Mac project [4256]
  • Stage Play US elements not recognized on Windows [4278]
  • BBC Taped Drama Character element lost from Mac [4263]
  • Implement Compile Styles export for Script Elements as styles in RTF
  • Auto-Open the legacy compile setting import dialog only if project compile settings exist [4284]
  • Add the “Tufte (Book)” MMD > LaTex document class [4277]
  • LaTeX Options “Custom” setting should make use of new MMD6 naming convention [4028]
  • MMD output directory now created according to Mac specification
  • Pandoc/Latex styles export
  • Markdown Compile folder generation and reuse [3451]
  • Styles override now matches Mac specification
  • Placeholders not handled if placed in Section Layout > Title Options [4238]
  • Mixed-case placeholders now correctly replaced
  • <$parentposition> placeholder ignored in compile replacements [4276]
  • Project Replace fails within main text [4271]
  • Flatten first line-indent functionality no matches Mac specification
  • Blue binder header and underline should indicate separate states [2737]
  • Spell Check issues handling apostrophes [3459]
  • Convert smart punctuation to dumb setting doesn’t save [4250]
  • Updated Documents collection empty after syncing updated files [2387]
  • Delay changing word/char type option in footer [4270]
  • Cannot create new items in empty outliner [4203]
  • File->Print and File->Print Preview will cause a crash [4262]
  • Compile replacement performance significantly improved

Beta 36 expires mid- Feb 2020.

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Jan 28th 2020

윈도우즈용 Scrivener 3.0 베타 35 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 34 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 35 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 35, 2.9.0.35판

내려받기 링크

2.9.0.35 (64비트) | 2.9.0.35 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 35를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 34에서 베타 35으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 스크리브너 1판의 컴파일 사전설정 가져오기를 추가하였어요(출시 준비) [4266]
  • 파일 -> 인쇄와 파일 -> 인쇄 미리보기로 인해 충돌이 발생 해요 [4262]
  • 컴파일 – 구역 배치 – 오른쪽 페이지 / 왼쪽 페이지가 저장되지 않아요 [4224]
  • 작성 모드에서 서식에 액세스 할 수 없어요 [2805]
  • 일부 옵션 변경에서 “스크리브너를 다시 시작해야 합니다” 메시지가 불필요하게 표시되요 [3812]
  • 이름이 같은 서식을 컴파일하면 서식 충돌이 발생해요. [4180]
  • 빈 개요자에서 새 항목을 만들 수 없어요 [4203]
  • 컴파일에서 MMD 변환 출력이 작동하지 않아요. [4206]
  • 맥 RTF 작업 파일을 읽을 때 기본 본문 편집기 문자 색상이 고려되지 않아요 [4213]
  • 컴파일 형식에서 일부 “전처리” 태그 읽기 / 쓰기 [4223]
  • 컴파일 대화 상자를 다시 열면 마지막 메인 컴파일 창이 기억되요
  • 옵션 대화 상자를 다시 열면 마지막 옵션 창이 기억됩니다
  • 개요자 그리고 또는 Corkboard에서 단일 문서 선택을 통해 새 하위 항목 생성해요 [#4203]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 1 월 19 일

원문

Scrivener 3.0 Beta 35 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 35, version 2.9.0.35

Download Link

2.9.0.35 (64-bit) | 2.9.0.35 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 35. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 34 to Beta 35 are listed below.

Bug Fixes

  • Added Import Scrivener v1 Compile Presets (Release Preparation) [4266]
  • File->Print and File->Print Preview causes a crash [4262]
  • Compile – Section Layout – recto/verso not saved [4224]
  • Styles inaccessible in Composition Mode [2805]
  • “Scrivener needs to be restarted” message shown unnecessarily from some Options changes [3812]
  • Compile formats with same name results in format collisions [4180]
  • Cannot create new items in empty outliner [4203]
  • None of the MMD conversion outputs are working in compile [4206]
  • Default text editor text color is not taken into account when reading Mac RTF project files [4213]
  • Read/Write some “PostProcessing” tags from the compile format [4223]
  • Last main Compile pane is remembered when re-opening Compile dialog
  • Last Options pane is remembered when re-opening the Options dialog
  • Allow single document selection in Outliner and or Corkboard to create new subitems [#4203]

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Jan 19th 2020

윈도우즈용 Scrivener 3.0 베타 34 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 33 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 34 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 34, 2.9.0.34판

내려받기 링크

2.9.0.34 (64비트) | 2.9.0.34 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 34를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2020년 1월 20일까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 33에서 베타 34으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 구역 배치 > 제목 옵션에 자리배치자가 있는 경우 처리되지 않아요 [4238]
  • 작업 검색에서 올바른 기초 자료 결과를 반환하지 않아요 [4234]
  • 작업 교체 후 문자가 사라지고 변경 사항이 저장되지 않아요 [4231]
  • 문자 형식으로 이미지를 복사 / 붙여 넣기하면 붙여 넣은 문자 끝에 마크 업 태그가 남아요. [4237]
  • 개행 전에 종료되는 문자 서식은 연속된 개행을 소멸해요 [3492]
  • 왼쪽 / 오른쪽으로 이동하면 목록 항목을 들여 써야 해요 [4233]
  • MMD-ODT의 중복 형식을 편집 할 때 컴파일 설정이 손실되요 [4227]
  • 대체용 대소 문자 구분 플래그가 적용되지 않아요. [4226]
  • 빠른 검색과 결과의 UI를 추가로 개선했어요 [2453]
  • 사용설명서 내용을 갱신하였어요
  • 구역 배치에 지정된 서식 할당은 플랫폼 간 호환이 되지 않아요 [4190]
  • 작업을 다시 연 후 축소된 관리자 창이 확대되요 [3754]
  • 작업 설정 배경 이미지 기본 배경에서 오타 [4235]
  • 빠른 참조 창에서 마우스 확대축사가 작동하지 않아요 [4207]
  • 바인더 아웃 라이너에서의 펼치기 / 접기 조정 [3692]
  • RTF / DOC / DOCX / PDF의 <$ BLANK_PAGE> 자리 표시자 수정 [4232]
  • 자동 백업에 대한 확장자 .bak 를 -bak로 변경 [4230]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 1 월 14 일

원문

Scrivener 3.0 Beta 34 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 34, version 2.9.0.34

Download Link
2.9.0.34 (64-bit) | 2.9.0.34 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 34. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side
It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 33 to Beta 34 are listed below.

Bug Fixes

  • Implemented RegExp2 throughout Scrivener [1443]
  • <$pagecount> always ‘-1’ in PDF compile [4215]
  • Quick Search and results UI consistent with Mac 2453]
  • Read/Write some “PostProcessing” tags from the compile format to preserve Mac content [4223]
  • Compile – Section Layout – recto/verso not saved [4224]
  • Extension field in plain-text compiler format designer does not function [3864]
  • Format bar Styles box has non-native scrollbars [4217]
  • Style box backgrounds work better with themes [4197]
  • Compile styles and styled section layout refinements
  • Compile replacements improvements
  • Bullet list refinements
  • Scrivener overall performance improvements

A Note on Suggestions
To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Jan 9th 2020

윈도우즈용 Scrivener 3.0 베타 33 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 32 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 33 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 33, 2.9.0.33판

내려받기 링크

2.9.0.33 (64비트) | 2.9.0.33 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 33를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2020년 1월 20일까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 32에서 베타 33으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 스크리브너 전체에서 RegExp2 구현하였어요 [1443]
  • PDF 컴파일에서 <$pagecount>가 항상 ‘-1’ [4215]
  • 맥과 일치하는 빠른 검색과 결과 이용환경 [2453]
  • 맥 내용물을 보존하기 위한 컴파일 형식에서 일부 “사전처리” 태그를 읽기/쓰기 [4223]
  • 컴파일 – 구역 배치 – 오른쪽 페이지 / 왼쪽 페이지가 저장되지 않음 [4224]
  • 일반 문서 컴파일러 형식에서 확장 항목이 기능하지 않음 [3864]
  • 서식 막대 양식 상자에 기본이 아닌 스크롤 막대가 있어요. [4217]
  • 양식 상자 배경은 테마와 더 잘 작동해요 [4197]
  • 컴파일 양식과 양식 있는 구역 배치를 개선했어요
  • 컴파일 대체를 개선했어요
  • 글 머리 기호 목록을 개선했어요
  • 스크리브너 전체 성능을 개선했어요

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 1 월 9 일

원문

Scrivener 3.0 Beta 33 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 33, version 2.9.0.33

Download Link
2.9.0.33 (64-bit) | 2.9.0.33 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 33. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side
It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 32 to Beta 33 are listed below.

Bug Fixes

  • Implemented RegExp2 throughout Scrivener [1443]
  • <$pagecount> always ‘-1’ in PDF compile [4215]
  • Quick Search and results UI consistent with Mac 2453]
  • Read/Write some “PostProcessing” tags from the compile format to preserve Mac content [4223]
  • Compile – Section Layout – recto/verso not saved [4224]
  • Extension field in plain-text compiler format designer does not function [3864]
  • Format bar Styles box has non-native scrollbars [4217]
  • Style box backgrounds work better with themes [4197]
  • Compile styles and styled section layout refinements
  • Compile replacements improvements
  • Bullet list refinements
  • Scrivener overall performance improvements

A Note on Suggestions
To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Jan 19th 2020

윈도우즈용 Scrivener 3.0 베타 32 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 31 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 32 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 32, 2.9.0.32판

내려받기 링크

2.9.0.32 (64비트) | 2.9.0.32 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 32를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 로드됩니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2020년 1월 20일까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 31에서 베타 32으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 고침

  • 보기 > “라벨 색상 사용” 문제 [4199]
  • 커리어 프라임의 변형 갱신 [4212]
  • Mac RTF 작업 파일을 읽을 때 기본 글자 편집기 글자 색상이 고려되지 않아요 [4213]
  • 개정 모드 추가 맥-윈 호환성 [1814]
  • <img… src = 속성이 없는 HTML 태그는 Scrivener를 차단할 거에요 [4208]
  • 컴파일에서 MMD 변환 출력이 작동하지 않음 [4206]
  • 빠른 참조 창에서 마우스 줌이 작동하지 않음 [4207]
  • 새 줄 앞의 문자 서식 중단(현상)이 연속 새줄을 소멸시킴 [3492]
  • 작업 설정 대화 상자 크기 [3312]
  • 접힌 점검도구 영역이 작업 다시 열고 난 뒤에 커져 있음 [3754]
  • 빈 개요자에 새로운 항목을 생성할 수 없음 [4203]
  • 일부 설정 변경에서 “스크리브너가 재시작되어야 할 필요가 있습니다”가 불필요하게 보여짐 [3812]
  • 일부 서식 상자에서 기본 문자 색상이 일부 색상 테마에서 읽을 수 없음 [4197]
  • Windows 3 용 Scrivener에 대한 자습서 업데이트 [3848]
  • 환경설정에서 표시와 출력 글꼴을 보여주기 추가 [4159]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019 년 12 월 21 일

원문

Scrivener 3.0 Beta 32 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 32, version 2.9.0.32

Download Link

2.9.0.32 (64-bit) | 2.9.0.32 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 32. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta expires end of Jan 20th 2020. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility
  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).
Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 31 to Beta 32 are listed below.

Bug Fixes
  • View > “Use Label Color In” issues [4199]
  • Update variant of Courier Prime [4212]
  • Default text editor text color is not taken into account when reading Mac RTF project files [4213]
  • Revision mode further Mac-Win compatibility [1814]
  • Html with an <img… tag but without an src= attribute will block Scrivener [4208]
  • MMD conversion outputs not working in compile [4206]
  • Mouse Zoom doesn’t work in Quick Reference Window [4207]
  • Character styles terminating before newline consume sequential newlines [3492]
  • Project Settings Dialog Size [3312]
  • Collapsed inspector pane enlarged after project reopened [3754]
  • Cannot create new items in empty outliner [4203]
  • “Scrivener needs to be restarted” shown unnecessarily from some Options changes [3812]
  • The default text color in some style boxes is unreadable in some color Themes [4197]
  • Tutorial updates for Scrivener for windows 3 [3848]
  • Add Display and Print font hinting preferences [4159]
A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Dec 21st 2019

윈도우즈용 Scrivener 3.0 베타 30 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 29 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 30 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 30, 2.9.0.30판

내려받기 링크

2.9.0.30 (64비트) | 2.9.0.30 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 30를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하신다면, 파일> 옵션에 있는 “관리 …” 단추를 통해 프로그램 기본 설정을 먼저 저장하고, 다음 새로 설치 한 후 다시 불러오기 하세요. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 12월 말까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 29에서 베타 30으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 사용설명서 갱신
  • 자습서 작업 기본 이용자환경 상태 갱신 [3848]
  • 자동저장 유휴 카운터는 수동 활동에 의해 재설정되어야 함 [703]
  • 컴파일 잘못된 CSS 아이콘을 가진 서식자 [4191]
  • 바인더 개요자에서 펴기/접기 조절 [3692]
  • 삽입된 페이지 나눔이 컴파일에서 빈 페이지의 원인이 됨 [435]
  • 작업 “식별자” 태그가 SCRIVX 파일에서 불려오지 않음 [4188]
  • 컴파일러 – Courier 글꼴이 교차 플랫폼에서 잘못 컴파일되어 사용됨 [3826]
  • 자습서 저장 실패가 Scrivener 열기를 방해 [3891]
  • 문서 견본 폴더가 “Templates”로 이름이 지정될 필요가 없음 [4170]
  • 견본 폴더가 초안으로 이동될 수 없음 [4171]
  • 환경설정에서 표시와 출력 글꼴을 보여주기 추가 [4159]
  • 일부 설정 변경에서 “스크리브너가 재시작되어야 할 필요가 있습니다”가 불필요하게 보여짐 [3812]
  • RTF 구역 접두와 접미가 작업을 닫을 때 손실됨
  • eBook 백 메터 수정
  • eBook eBookStart 자리표시자가 추가
  • eBook 구역 사이에 전용 CSS 구분자 서식 추가
  • 작업 공유할 때 이제 맥에서 작업 병합이 완벽함

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019년 11월 28일

원문

Scrivener 3.0 Beta 30 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 30, version 2.9.0.30

Download Link

2.9.0.30 (64-bit) | 2.9.0.30 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 30. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta expires end of December 2019. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility
  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).
Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 29 to Beta 30 are listed below.

Bug Fixes
  • Updates to Manual
  • Updates to Tutorial project default UI states [3848]
  • Auto-save idle counter should be reset by passive activity [703]
  • Compile Formatter wrong CSS icon [4191]
  • Adjustments to expansion/collapse in binder outliner [3692]
  • Inserted page breaks can cause blank page in compile [435]
  • Project “Identifier” tag is not loaded from the SCRIVX file [4188]
  • Courier font incorrectly available in compile & used in cross-platform projects [3826]
  • Failure to save tutorial prevents Scrivener opening [3891]
  • Document Template Folder shouldn’t have to be named “Templates” [4170]
  • Template Folder should not be able to move to draft [4171]
  • Add Display and Print font hinting preferences [4159]
  • “Scrivener needs to be restarted” shown unnecessarily from some Options changes [3812]
  • RTF Section prefixes and suffixes lost when closing project
  • eBook Back Matter fixes
  • eBook add eBookStart placeholder
  • eBook add dedidicated CSS separator styles between sections
  • Merging projects on Mac now seemless when sharing projects
A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Nov 28th 2019

윈도우즈용 Scrivener 3.0 베타 29 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 28 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 29 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 29, 2.9.0.29판

내려받기 링크

2.9.0.29 (64비트) | 2.9.0.29 (32비트)

(32 비트판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 베타 29를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하신다면, 파일> 옵션에 있는 “관리 …” 단추를 통해 프로그램 기본 설정을 먼저 저장하고, 다음 새로 설치 한 후 다시 불러오기 하세요. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 11월 말까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 주제를 구독 할 수 있어요.

베타판에서 최신 베타판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 판이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 Scrivener 1의 작업을 Scrivener 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 Scrivener 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9와 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타를 동시에 설치할 수 있지만, 설치 과정에서 다른 위치를 선택해야해요 (예 : 기본 “Scrivener”폴더 이름을 “Scrivener3″으로 변경). Scrivener 3을 설치하기 전에 Scrivener 1.9.9 바로 가기의 이름을 변경하셔서 새로운 설치가 그것을 덮어쓰는 것을 방지하게 하는 것을 권해드려요.

지금 알아두시기 바라는 것은, 윈도우즈 프로그램 목록에 가장 최근에 설치된 Scrivener 판만 보일 것이고, 작업 파일을 두번 누르기하시면 그(나중에 설치된)판으로 열기를 시도할거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 28에서 베타 29로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정:

  • 컴파일 – 머리말과 꼬리말이 “첫 페이지”에서만 동작 [3602]
  • 컴파일 – 머리말과 꼬리말이 잘 못 정렬됨 [3603]
  • 컴파일 – 견본이 있는 머리말과 꼬리말 문제 [3807]
  • 컴파일 – 작업 서식이 컴파일된 ebook 출력에서 자동적으로 분류되지 않음 [3969]
  • 컴파일 – MMD를 리치 텍스트로 변환하는 선택지가 관련이 없는 경우 활성화됨 [4078]
  • 컴파일러 – 서식 – 형식 내에서 한 것이 손실됨 [4097]
  • 컴파일 – 구역 배치에서 요소를 추가 시 선택된 문자의 서식이 변경됨 [4122]
  • 컴파일 – 이용자 정의 머리말/꼬리말 여백 조절 [4126]
  • 컴파일 – RTF 왼쪽/가운데/오른쪽 정렬된 다중 부분 머리말/꼬리말 조절 [4133]
  • 컴파일 – 초안 폴더에서 메타 데이터 문서를 사용하면 결과로부터 내용을 제거하지 않음 [4137]
  • 컴파일 – 이북의 도표 출력이 머리말 블록과 줄이 부족 [4138]
  • 컴파일 – 마주보는 페이지에 대한 이용자 정의 여백 설정 조절 [4146]
  • 컴파일 – 컴파일 내용 창의 아이콘 들여쓰기 [4150]
  • 컴파일 – 자리표시자 <$t>가 “대문자” 설정으로 동작하지 않음 [4151]
  • 컴파일 – 내용 창 UI 구체화 [4152]
  • 컴파일 – 이용자 정의 머리말/꼬리말 여백이 RTF 형식에 적용되지 않음 [4143]
  • 컴파일 – ePub 생성을 위한 CSS 조정 [4109]
  • 링크 오른쪽 클릭이 첫 번째를 제외한 모든 문자를 선택 [3447]
  • 머리말/꼬리말 선택지가 페이지 설정 없이 편집 가능 [3824]
  • 윈도우즈용 Scrivener 3을 위한 자습서 재새식화 [3848]
  • 자습서 저장 실패가 Scrivener 열기를 방해 [3891]
  • 기본 문자 확대가 이미 있는 편집기에 영향을 주지 않음 [3905]
  • 리치 텍스트를 MMD로 변환하는 선택지가 lines.md 메타데이터를 공백 가득 (출력) [3991]
  • 개정 색상이 PDF로 컴파일할 때 보여지 않음 [4085]
  • 상태표시줄 문자 배율조정이 옵션에서 100%를 사용하지 않을 때 바르게 시작하지 않음 [4130]
  • Scrivener를 재시작 시 일부 글꼴이 항상 굵게 불려옴 [4141]
  • 점검도구가 비활성 편집기 창을 따름 [4145]
  • 편집 > 검색 > 빠른 검색이 기능하지 않음 [4157]
  • 환경설정에서 표시와 출력 글꼴을 보여주기 추가 [4159]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019년 11월 14일

원문

Scrivener 3.0 Beta 29 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 29, version 2.9.0.29

Download Link

2.9.0.29 (64-bit) | 2.9.0.29 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 29. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta expires end of November 2019. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 28 to Beta 29 are listed below.

Bug Fixes

  • Compile – Header and Footer only work in “First Pages” [3602]
  • Compile – Header and Footer Alignment incorrect [3603]
  • Compile – Header and Footer Issues with templates [3807]
  • Compile – Project styles are not automatically classed in compiled ebook output [3969]
  • Compile – option to convert MMD to rich text is active when irrelevant [4078]
  • Compile – Styles – assignments made within the format are lost [4097]
  • Compile – Adding elements in section layouts changes formatting of selected text [4122]
  • Compile – adjust custom Header/Footer margins [4126]
  • Compile – adjust RTF left/center/right aligned multi-part headers/footers [4133]
  • Compile – Use of a metadata document in the draft folder does not remove the content from the output [4137]
  • Compile – Table output in ebooks lack header block and rows [4138]
  • Compile – adjust custom margin settings for facing pages [4146]
  • Compile – Indent the icons of the Compile Content pane [4150]
  • Compile – Placeholder <$t> not working in with “Uppercase” setting [4151]
  • Compile – contents pane UI refinements [4152]
  • Compile – custom header/footer margins not applying to RTF formats [4143]
  • Compile – adjust CSS for ePub generation [4109]
  • Right-clicking Link selects all but first character [3447]
  • Header/Footer options editable with no page selection [3824]
  • Reformatting of Tutorial for Scrivener for windows 3 [3848]
  • Failure to save tutorial prevents Scrivener opening [3891]
  • Default text zoom affecting existing editors [3905]
  • Convert rich text to MMD option spaces out metadata lines.md [3991]
  • Revision colors do not show when compiling to PDF [4085]
  • Statusbar text zoom is not correct upon startup when using a non-100% zoom in Options [4130]
  • Some fonts will always load as Bold upon restarting Scrivener [4141]
  • Inspector follows the inactive editor pane [4145]
  • Edit > Find > Quick Search is not functional [4157]
  • Add Display and Print font hinting preferences [4159]

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Nov 14th 2019

윈도우즈용 Scrivener 3.0 베타 28 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 27 출시 문서 에서 바뀐 것은 개선과 버그 수정 부분이네요.

Scrivener 3.0 베타 28 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 28, 2.9.0.28판

내려받기 링크

2.9.0.28 (64비트) | 2.9.0.28 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 베타 28을 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하신다면, 파일> 옵션에 있는 “관리 …” 버튼을 통해 프로그램 기본 설정을 먼저 저장하고, 다음 새로 설치 한 후 다시 불러오기 하세요. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 11월 말까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타판이 출시 될 때 알림을 받기 위해 이 주제를 구독 할 수 있어요.

베타판에서 최신 베타판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 Scrivener 1의 작업을 Scrivener 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9와 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타를 동시에 설치할 수 있지만, 설치 과정에서 다른 위치를 선택해야해요 (예 : 기본 “Scrivener”폴더 이름을 “Scrivener3″으로 변경). Scrivener 3을 설치하기 전에 Scrivener 1.9.9 바로 가기의 이름을 변경하셔서 새로운 설치가 그것을 덮어쓰는 것을 방지하게 하는 것을 권해드려요.

지금 알아두시기 바라는 것은, 윈도우즈 프로그램 목록에 가장 최근에 설치된 Scrivener 판만 보일 것이고, 작업 파일을 두번 누르기하시면 그(나중에 설치된) 판으로 열기를 시도할거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 27에서 베타 28로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정:

  • 윈도우용 Scrivener 3.0 설명서의 첫 초안. 도움말 메뉴를 보세요
  • 컴파일 – 페이지 하단 각주와 다른 각주 옵션을 추가 지원
  • 빈 프로젝트가 페이지 설정 여백이 0을 가짐 [4136]
  • 컴파일 – 기본 종이 크기가 컴파일 형식에서 무시됨 [3936]
  • 서식을 노트 문자에 적용할 때 충돌 [4134]
  • 컴파일 – 구역 배치 – 이 구역에서 서식의 사용이 형식 서식을 참조해야…[3972]
  • 컴파일 – 편집 서식 시험하기가 아무것도 안 함 [3610]
  • 컴파일 – 서식 – 구역 배치에서 서식을 제거가 서식화를 유지 [4121]
  • 외부 링크에 대한 책갈피 미리보기 구역 배경을 수정 [4077]
  • 컴파일 – ePub 각주가 contents.xhtml에서 오류의 원인이 됨 [4076]
  • 상태표시줄 문자 배율조정이 옵션에서 100%를 사용하지 않을 때 바르게 시작하지 않음 [4130]
  • 링크의 오른쪽 클릭이 링크의 첫 번째 글자를 선택하지 않음 [4131]
  • 기본 문자 확대가 이미 있는 편집기에 영향을 주지 않음 [3905]
  • 점검도구 내에 사전정의된 주석 색상 이용자 정의하기 선택이 기억되지 않음 [4129]
  • 컴파일 – 여백이 PDF와 인쇄에서 머리말/꼬리말에 영향 [673]
  • 컴파일 – 배열 – 접두와 접미가 서식 접근성을 가짐 [3973]
  • 스크래치패드 개선 [4116]
  • 컴파일 – HTML로 컴파일된 파일이 태그를 확실하게 닫지 않음 [4114]
  • 컴파일러 – 서식 – 형식 내에서 한 것이 즉시 손실됨 [4097]
  • 컴파일 – 서식 – 구역 배치 문자가 서식화할 때 제거됨 [4118]
  • 레거시 파일 이름을 이름 생성기로 가져오기하는 기능 추가 [4091]
  • 컴파일 – ePub contents.xhtml에서 epub:type=”reader-start-page”을 제거 [4047]
  • 컴파일 웹페이지 파일 유형에 epub 네임스페이스 삽입 [4094]
  • 컴파일 – 개요 수준별로 들여 쓰기 변환 추가 컴파일 옵션이 작동하지 않음 [3924]
  • 컴파일 – 형식 “원고(타임스)”가 “Times New Roman”을 사용하여 컴파일 하지 않음 [4107]
  • 더 이상 존재하지 않는 작업을 찾는 “재시도” 단추가 추가됨 [4063]
  • Scrivener가 열 때 글꼴을 변경해요. [4115]
  • 컴파일 – 항상 전역 재정의 글꼴을 사용함 [4117]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019년 11월 6일

원문

Scrivener 3.0 Beta 28 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 28, version 2.9.0.28

Download Link

2.9.0.28 (64-bit) | 2.9.0.28 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 28. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta expires end of November 2019. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 27 to Beta 28 are listed below.

Bug Fixes

  • First Draft of Scrivener for Windows 3.0 Manual. See Help Menu
  • Compile – Added support for end of page footnotes and other footnote options
  • Blank projects have 0 margin page settings [4136]
  • Compile – Default paper size ignored in compile formats [3936]
  • Crash when Applying Styles to Notes Text [4134]
  • Compile – Section Layouts – use of styles within this pane should reference the Format st… [3972]
  • Compile – Edit Format Test does nothing [3610]
  • Compile – Styles – Removing style in Section Layouts should retain formatting [4121]
  • Fix the Bookmarks Preview area background for External Links [4077]
  • Compile – ePub footnotes will cause an error in contents.xhtml [4076]
  • Statusbar text zoom is not correct upon startup when using a non-100% zoom in Options [4130]
  • Right-clicking a link will not select the first character of the link [4131]
  • Default text zoom affecting existing editors [3905]
  • Selecting a custom predefined comment color inside the Inspector is not remembered [4129]
  • Compile – Margins affect header/footer in PDF and print [673]
  • Compile – Layouts – prefix and suffix have style access [3973]
  • ScratchPad improvements [4116]
  • Compile – HTML compiled files do not close properly the <meta> tag [4114]
  • Compile – Styles – assignments made within the format are lost immediately [4097]
  • Compile – Styles – Section Layout text disappears when style removed [4118]
  • Add the ability to import legacy file names into the Name Generator [4091]
  • Compile – Remove epub:type=”reader-start-page” from the ePub contents.xhtml [4047]
  • Compile – Web Page file type inserts epub namespace [4094]
  • Compile – “Add indent per outline level” Transformations compile option is nonfunctional [3924]
  • Compile – format “Manuscript (Times)” does not compile using “Times New Roman” [4107]
  • Add “Retry” button upon detecting a no longer existing project [4063]
  • Scrivener changes font on opening. [4115]
  • Compile – always uses global override font [4117]

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Nov 6th 2019

윈도우즈용 Scrivener 3.0 베타 27 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 26 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 27 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타 버전을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 27, 2.9.0.27판

내려받기 링크

2.9.0.27 (64비트) | 2.9.0.27 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 베타 27을 설치하기 전에 이전 베타 버전을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일> 옵션 버튼을 클릭 한 다음 새로 설치 한 후 다시로드하십시오. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2019 년 11 월 중순까지 진행됩니다. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9와 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타를 동시에 설치할 수 있지만 설치 과정에서 다른 위치를 선택해야합니다 (예 : 기본 “Scrivener”폴더 이름을 “Scrivener3″으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 26에서 베타 27으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 컴파일러 – “개요 수준마다 들여 쓰기 추가”변환 컴파일 옵션이 작동하지 않음 [3924]
  • 컴파일러 – “제목 수준” 도구 모음 선택 항목을 컴파일 서식 편집기에 추가 [4102]
  • 컴파일러 – 어두운 모드에서 컴파일 CSS 강조 색상이 보이지 않음 [4042]
  • 컴파일러 – 제목 만 삽입하고 텍스트는 삽입하지 않는 구역 배치로 문서를 컴파일 [4089]
  • 컴파일러 – 컴파일 메타 자료가 잘못 저장되어 컴파일된 출력에 사용되지 않음 [3816]
  • 컴파일러 – 웹 페이지 파일 형식으로 컴파일하면 epub 네임 스페이스가 삽입 됨 [4094]
  • 컴파일러 – Courier 글꼴이 교차 플랫폼에서 잘못 컴파일되어 사용됨 [3826]
  • 컴파일러 – 컴파일 형식에서 기본 용지 크기가 무시됨 [3936]
  • 컴파일러 – 형식 시험 편집이 아무 것도 수행하지 않음 [3610]
  • 컴파일러 – 배열 – 접두형과 접미형에 서식 접근 권한이 있음 [3973]
  • 컴파일러 – 구역 배열 – 마크다운과 TXT에 대한 전체 서식 액세스가 가능함 [4026]
  • 컴파일러 – 구역 배열 – 이 창에서 스타일을 사용하면 서식화 서식을 참조함 [3972]
  • 컴파일러 – 서식 – 형식 내에서 한 것이 즉시 손실됨 [4097]
  • 컴파일러 – 서식 – 예제 문자가 문자 속성을 변경할 때 사라짐 [4096]
  • 컴파일러 – 컴파일러의 작업 메타 자료 설정의 탭 순서가 잘못됨 [4087]
  • 컴파일러 – 작업 서식이 컴파일 중에 손실됨 [4103]
  • 레거시 파일 이름을 이름 생성기로 가져오기하는 기능 추가 [4091]
  • “I.e”에서 “i.e.”로 자동 대문자화 자동 수정 [4075]
  • 바인더 상단에 새 항목을 만들면 모든 하위요소가 축소됨 [4090]
  • 현재 Scrivenings 문서로 인스펙터를 자동 전환하지 않음 [4080]
  • 작업 간 책갈피로 문서를 끌어 놓기 [4074]
  • 강조가 여전히 활성화 / 정지된 경우 찾기와 바꾸기가 작동하지 않음 [3192]
  • 찾기 창이 열리고 편집기가 닫힐 때의 충돌 수정 [4082]
  • 외부 링크에 대한 책갈피 미리보기 영역 배경 수정 [4077]
  • RTF 파일 내에서 결합 된 글꼴 집합 이름 처리 [4101]
  • 점검도구 노트 구현 타이틀 기능 확장/축소 개선 [4044]
  • 바인더 항목 선택 하위 메뉴에서 목록을 채우지 않는 작업 책갈피 [3250]
  • Scrivenings 모드에서 스크롤해도 새 문서로 자동 전환되지 않음 [3988]
  • 세션 대상에 추가 분할하고 병합 [4030]
  • 일부 작업에서 서식 구역 내의 서식 제목이 검음 [3901]
  • 원시 마크 업으로 저장하지 않음으로 처리 [3622]
  • Scratchpad에 일반 본문 지원 추가 ** 시험 전 ScratchPad 디렉토리 우선 백업 ** [4052]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019 년 10 월 26 일

원문

Scrivener 3.0 Beta 27 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 27, version 2.9.0.27

Download Link

2.9.0.27 (64-bit) | 2.9.0.27 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 27. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta will run through to mid-November 2019. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 26 to Beta 27 are listed below.

Bug Fixes

  • Compiler – “Add indent per outline level” Transformations compile option is nonfunctional [3924]
  • Compiler – Add “Heading Level” toolbar selection to the Compile Styles editor [4102]
  • Compiler – Compile CSS highlighter colors are not visible in Dark mode [4042]
  • Compiler – Compile documents with Section Layouts which insert only headings but no text. [4089]
  • Compiler – Compile metadata stored incorrectly, and not used in compiled output [3816]
  • Compiler – Compiling to Web Page file type inserts epub namespace [4094]
  • Compiler – Courier font incorrectly available in compile & used in cross-platform projects [3826]
  • Compiler – Default paper size ignored in compile formats [3936]
  • Compiler – Edit Format Test does nothing [3610]
  • Compiler – Layouts – prefix and suffix have style access [3973]
  • Compiler – Section Layouts – full formatting access should be available to Markdown and TXT [4026]
  • Compiler – Section Layouts – use of styles within this pane should reference the Format style [3972]
  • Compiler – Styles – assignments made within the format are lost immediately [4097]
  • Compiler – Styles – sample text vanishes when modifying character attributes [4096]
  • Compiler – The tab sequence of the project metadata settings in compiler are out of order [4087]
  • Compiler – Project Styles lost during compilation [4103]
  • Add the ability to import legacy file names into the Name Generator [4091]
  • Autofix auto-capitalized “I.e.” into “i.e.” [4075]
  • Creating a new item at the top of the Binder collapses all children [4090]
  • Do not auto-switch the Inspector to the current Scrivenings document [4080]
  • Drag and drop documents into Bookmarks between projects [4074]
  • Find & Replace doesn’t work if highlight still active/flashing [3192]
  • Fix a crash when the Find window is open and editor is closed [4082]
  • Fix the Bookmarks Preview area background for External Links [4077]
  • Handle combined font family names inside the RTF files [4101]
  • Implement Inspector Notes Expand/Collapse title capabilities [4044]
  • Project Bookmarks not filling lists in binder item selection submenus [3250]
  • Scrolling in Scrivenings mode will not auto-switch to the new document [3988]
  • Split and Merge adding to Session Targets [4030]
  • Style titles inside the Style panel are black in some projects [3901]
  • Treat as Raw Markup not saving [3622]
  • Added plain text support to Scratchpad **Backup ScratchPad directory prior to testing** [4052]

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Oct 26th 2019

윈도우즈용 Scrivener 3.0 베타 26 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 25 출시 문서 에서 바뀐 것은 개선과 버그 수정 부분이네요.

스크리브너 3.0 베타 26 (링크 및 변경 목록 다운로드)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타 버전을 내려받으시거나 보고서를 게시하지 말아주세요.

현재 : 베타 26, 2.9.0.26판

내려받기 링크

2.9.0.26 (64비트) | 2.9.0.26 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 베타 26을 설치하기 전에 이전 베타 버전을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있습니다. 파일> 옵션 버튼을 클릭 한 다음 새로 설치 한 후 다시부르기하십시오. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2019년 10월 말까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9와 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 25에서 베타 26으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

개선과 버그 수정

  • 빈 작업을 컴파일할 때 스크리브너 충돌 [4065]
  • 컴파일 시 전자책에 점검도구의 주석과 각주를 내보내기 [4061]
  • 컴파일 시 어도비 디지털 에디션에서 ePub 목차 [178]
  • 컴파일 시 전환 컴파일 창에서 대부분의 기능이 여전히 작동하지 않음 [3926]
  • 컴파일 시 형식 구축에서 파일 형식의 분류를 Alt 누르기로 전환하기 [3981]
  • 언제나 삽입 모드로 시작(덮어쓰기 모드 아님) [4073]
  • “I.e”에서 “i.e.”로 자동 대문자화 자동 수정 [4075]
  • 작업 간 책갈피를 문서에 끌어서 놓기 [4074]
  • 작업 책갈피가 선택된 하위메뉴 바인더 항목에서 목록을 채우지 않음 [3250]
  • 내부 백링크 기능 구현 [3563]
  • 이름표에 따라 코르크판 카드 크기를 바꾸는 것을 허용하지 않음 [4064]
  • 겹치기 모드가 기능하지 않음 [4062]
  • 기본 문자 확대가 이미 있는 편집기에 영향을 주지 않음 [3905]
  • 점검도구 책갈피 배경이 테마에 따라 바뀌지 않음 [4071]
  • 이름 생성기 – 충돌 [4070]
  • 이름 생성기 이용자 정의된 이름목록의 가져오기와 지우기를 구현하였어요
  • 편집기 기본을 사용하는 문서에 강조하기와 색상 서식화 [4069]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019년 10월 17일

원문

Scrivener 3.0 Beta 26 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 26, version 2.9.0.26

Download Link

2.9.0.26 (64-bit) | 2.9.0.26 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 26. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta will run through to end of October 2019. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 25 to Beta 26 are listed below.

Implementions and Bug Fixes

  • Compiling Blank Project Crashes Scrivener [4065]
  • Compile Export Inspector comments and footnotes to eBooks [4061]
  • Compile ePub TOC in Adobe Digital Editions [178]
  • Compile most functions in the Transformations compile pane are still nonfunctional [3926]
  • Compile Alt-clicking to toggle categories of file types in Format design [3981]
  • Always start in insert mode(not overwrite) [4073]
  • Autofix auto-capitalized “I.e.” into “i.e.” [4075]
  • Drag and drop documents into Bookmarks between projects [4074]
  • Project Bookmarks not filling lists in binder item selection submenus [3250]
  • Implement internal back-link capability [3563]
  • Corkboard arrange by Labels does not allow changing the card size [4064]
  • Overtype mode is not functional [4062]
  • Default text zoom affecting existing editors [3905]
  • Inspector Bookmarks background does not change with Themes [4071]
  • Name Generator – Crash [4070]
  • Name Generator implemented import and delete of user defined namelists
  • Notes using editor default formatting highlight and text colour [4069]

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Oct 17th 2019

윈도우즈용 Scrivener 3.0 베타 25 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 24 출시 문서 에서 바뀐 것은 개선과 버그 수정 부분이네요.

Scrivener 3.0 베타 25 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타 버전을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 25, 2.9.0.25판

내려받기 링크

2.9.0.25 (64비트) | 2.9.0.25(32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 베타 25을 설치하기 전에 이전 베타 버전을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일> 옵션 버튼을 클릭 한 다음 새로 설치 한 후 다시로드하십시오. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2019년 10월 말까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9와 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 24에서 베타 25으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

개선과 버그 수정

  • 컴파일 시 스타일 재정의 컴파일 이름이 작동하지 않아요 [3971]
  • 컴파일 시 내보낸 파일에서 컴파일 서식 정보를 제거할 수 없어요 [3977]
  • 컴파일 시 바르지 않게 저장된 메타자료의 컴파일이, 컴파일된 결과에 사용되지 않아요 [3816]
  • 컴파일 시 필터 아이콘이 “활성화된”판을 가지고 있어야 해요 [4059]
  • 컴파일 시 CSS 형광펜 색상이 다크 모드에서 표시되지 않아요 [4042]
  • 컴파일 시 ePub이 잘못된 “ul” xhtml 태그를 생성해요 [4048]
  • 컴파일 시 ePub 주석과 각주가 이제 기본적으로 지원되요
  • 컴파일 시 사용자 지정 메타 자료가 잘못된 메타자료에 컴파일이 되요 [3634]
  • 컴파일 시 ODT에서 각주가 미주에 컴파일 되었지만 이제 페이지마다 되요
  • 컴파일 시 ePub HTML 창이 완전히 구현되었어요
  • 컴파일 시 통계 창이 완전히 개선되었어요
  • 컴파일러 변환 창이 완전히 구현되었어요
  • 컴파일 시 이제 기록 모드일 때 기록들을 수락합니다
  • 컴파일 시 RTF로 서식 내보내기가 꺼짐/켜짐이 개선되었어요
  • 컴파일 시 글꼴 집합, 글꼴 크기가 이제 문단 서식을 활성화해요
  • 컴파일 시 서식이 맥과 일치하도록 조정되었어요
  • 하이퍼링크 범위가 적용되 문자로 확장되었어요 [1902]
  • 연결 추가 시 프로토콜이 https에서 http로 전환되요 [4045]
  • 편집 시: 서식화 설정 탭이 편집기로부터 삽입하기 단추를 가지고 있어야 해요 [3820]
  • 라벨에 따라 코르크판 정렬이 카드 크기를 변경하는 것을 허용하지 않아요 [4064]
  • 더 이상 존재하지 않는 작업을 찾는 “재시도” 단추가 추가되었어요 [4063]
  • 겹쳐쓰기 모드가 작동하지 않아요 [4062]
  • 서식 창 안에 있는 서식 제목이 일부 작업에서 비어있어요 [3901]
  • 이름 생성기 도구가 맥과 같이 갱신되었어요 [4053]
  • 점검도구 비고 확장/축소 기능을 구현하였어요 [4044]
  • ui-common.xml의 불러오기/저장하기를 조정하였어요 [4033]
  • UI: 검색 인덱스 문자를 불러올 때 포장되지 않아요 [4009]
  • 기록 모드에서 스크롤이 새로운 문서로 자동전환되지 않을 거에요 [3988]
  • “여기에 작업 메타자료 삽입” 지시자가 기능하지 않아요 [3930]
  • 분리 & 병합이 바르지 않은 세션 대상을 생성하는 세션대상의 원인이 되요.
  • 도구설명이 점검도구 비고/각주에서 하이퍼링크에 대하여 바르게 보이지 않아요

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019년 10월 10일

원문

Scrivener 3.0 Beta 25 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 25, version 2.9.0.25

Download Link

2.9.0.25 (64-bit) | 2.9.0.25 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 25. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta will run through to end of October 2019. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.

  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 24 to Beta 25 are listed below.

Implementions and Bug Fixes

  • Compile Styles Override name is nonfunctional [3971]
  • Compile Styles information cannot be stripped from exported file [3977]
  • Compile metadata stored incorrectly, and not used in compiled output [3816]
  • Compile filter icon should have “enabled” version [4059]
  • Compile CSS highlighter colors are not visible in Dark mode [4042]
  • Compile ePub will generate wrong “ul” xhtml tags [4048]
  • Compile ePub comments and footnotes now supported natively
  • Compile Custom Metadata List Type compiles wrong under Metadata [3634]
  • Compile footnotes compiled to end notes for ODT now per page
  • Compile ePub HTML pane ully implemented
  • Compile Statistics pane fully implemented
  • Compiler Transformation pane fully implemented
  • Compile now accepts Scrivenings when in Scrivenings mode
  • Compile on/off export styles to RTF implemented
  • Compile font family, font size now enabled for paragraph styles
  • Compile styles adjusted to match Mac
  • Hyperlink range extends beyond applied text [1902]
  • Add Link web protocol switches from https to http [4045]
  • Editing: Formatting settings tab should have button to inject from editor [3820]
  • Corkboard arrange by Labels does not allow changing the card size [4064]
  • Add “Retry” button upon detecting a no longer existing project [4063]
  • Overtype mode is not functional [4062]
  • Style titles inside the Style panel are black in some projects [3901]
  • Update the Name Generator tool to be like Mac [4053]
  • Implement Inspector Notes Expand/Collapse capabilities [4044]
  • Tweaks to loading/saving of ui-common.xml [4033]
  • UI: Loading Search Index error text isn’t wrapping [4009]
  • Scrolling in Scrivenings mode will not auto-switch to the new document [3988]
  • The “Insert project metadata here” indicator is nonfunctional [3930]
  • Split & Merge cause session targets to generate incorrect session targets
  • Tooltip not presented properly for hyperlinks in inspector note/footnote

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Oct 10th 2019

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept
Privacy Policy