계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받거나 보고를 게시하지 마세요.
———
현재: 베타 – 출시 후보 18, 2.9.9.18판
최신 배타 – 출시 후보 18 내려받기 연결
2.9.9.18 (64비트) | 2.9.9.18 (32비트)
(32 비트판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치하고 64 비트 버전은 C:\Program Files\Scrivener에 설치합니다. 이 베타를 설치하기 전에 이전 베타를 제거했는지 확인합니다. 원한다면 “관리…”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 선택지의 단추를 누른 다음 새로 설치한 후 다시 부릅니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하기 바랍니다.)
새로운 잠정적 베타는 여기에 게시할 것입니다; 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주기 바랍니다. 새 베타판을 출시 할 때 알림을 받기 위해 이 주제를 구독 할 수 있습니다.
베타판에서 최신 베타판을 내려받기 위해 도움말 > 업대이트 확인을 사용할 수 있습니다.
시스템 요구 사항과 호환성
- 스크리브너 3에는 .NET v4.6.2 또는 그 이상의 판을 설치한 윈도우즈 7 또는 이상이 필요합니다.
- 갱신한 스크리브너 3의 파일 형식은 스크리브너 1(또는 맥에서 스크리브너 2)와 호환하지 않습니다. 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 작업을 갱신할 것인지 질문을 받습니다. 이후에는 스크리브너 1에서 열 수 없습니다(갱신하기 전에 백업이 만들어지기는 합니다).
1.9.9와 3.0 베타 나란히 설치하기
1.9.9와 스크리브너 3.0 베타 둘 모두 동시에 설지할 수 있지만, 설치 진행 중에 다른 위치를 선택해야만 합니다(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경하기). 스크리브너 3을 설치하기 전에 스크리브너 1.9.9 바로 가기의 이름을 변경하여 새로운 설치가 덮어쓰는 것을 방지하게 하는 것을 권합니다.
지금 알아두기 바라는 것은, 윈도우즈 프로그램 목록에 가장 최근에 설치한 스크리브너 판만 보일 것이고, 작업 파일을 두번 누르면 그 판으로 열기를 시도할 것입니다. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 스크리브너 안에서 파일 > 열기를 사용하시는 것으로 대신 할 수 있습니다.
수정
- MMDHashCount는 .scrformat 파일로 내보내지 않습니다 [4874]
- 컴파일 – 구분 도구 – 항목 구분은 교체로 처리하지 않습니다 [4513]
- 작업을 닫을 때 점검도구가 숨겨져있는 책갈피 보기로 바꿉니다 [4873]
- 전자책으로 컴파일하면 문서 연결로 일관하게 변경하지 않습니다 [4880]
- 전자책 사용자 정의 목차 출력이 깨집니다 [4878]
- 일부 컴파일 견본과 작업 견본을 업대이트합니다 [4881]
- 보기 > 점검도구는 메뉴에 지시자를 보여야 합니다 [4872]
- 옵션 > 지금 편집기 & 작업 설정에서 서식화 사용하기는 잘못이 있는 블록 형식을 사용합니다 [4882]
- 스크리브너와 함께 배포하는 Courier Prime 글꼴을 업대이트합니다 [4884]
- Courier Prime이 있는 PDF를 컴파일하면 문자가 뒤섞입니다 [4875]
- 최신 전자책 각주 설정을 맥과 일치하도록 추가합니다 [4848]
- 원고대가 편집기와 함께 자동으로 열리고 바르지 않게 나눕니다 [4609]
- 이미지가 있는 일부 전자책이 전자책 검수에 실패할 수 있습니다 [4870]
- 메뉴 단축키에 “Meta” 대신 “Win”을 사용합니다 [4869]
베타 출시 후보 18은 2021년 2월 28일까지 유효합니다.
제안에 대한 안내
남겨진 버그 해결을 도우시려면, 베타 포럼 글에 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠습니다. 이용환경 또는 기능적인 제안은 스크리브너의 일반 희망목록 포럼에 게시하기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사합니다!
감사합니다,
리와 티호
2021년 2월 17일
Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———
Current: Beta – Release Candidate 18, version 2.9.9.18
Latest Beta – Release Candidate 18 Download Link
2.9.9.18 (64-bit) | 2.9.9.18 (32-bit)
(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing this Beta. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)
New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.
You can also use Help > Check for Updates in beta releases to download the latest beta.
System Requirements and Compatibility
- Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
- Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).
Installing 1.9.9 and 3.0 Beta Side by Side
It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.
Fixes
- MMDHashCount not exported into .scrformat file [4874]
- Compile – Separators – item separation not handled by Replacements [4513]
- Inspector changes to bookmarks view if hidden on project close [4873]
- Compile to ebooks not consistently converting document links [4880]
- Ebook custom ToC output is broken [4878]
- Update some compile templates and Project Template [4881]
- View > Inspector should show state indicator in menu [4872]
- Options > Use Formatting in Current Editor & Project Settings > Use Current, use wrong block formats [4882]
- Update the Courier Prime font distributed with Scrivener [4884]
- Compiling PDF with Courier Prime can produce scrambled text [4875]
- Add last Ebook endnote settings to match Mac [4848]
- Copyholder automatically reopened with editor and split incorrectly [4609]
- Some eBooks with images might fail ePub validation [4870]
- Use “Win” instead of “Meta” for the menu shortcuts [4869]
Beta Release Candidate 18 expires 28th Feb 2021.
A Note on Suggestions
To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!Thanks,
Lee & Tiho
Feb 17th 2021