이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 출시 후보 2 출시 문서 에서 바뀐 것은 버그 수정 부분이네요. 이제 출시 후보라 그런지 수정되는 버그가 확연히 줄었네요.
계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.
———
현재: 베타 – 출시 후보 3, 2.9.9.3판
최신 배타 – 출시 후보 3 내려받기 연결
중요: 작업에서 ̊글 머리 기호른 많이 사용한다면, 스크리브너 출시 후보 1을 시험하기 전에 백업하시기 바래요.
2.9.9.3 (64비트) | 2.9.9.3 (32비트)
(32 비트판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 베타 44를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)
새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.
베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.
시스템 요구 사항과 호환성
- Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
- 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).
1.9.9과 3.0 베타 나란히 설치하기
1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설지할 수 있어요, 하지만 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.
이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.
버그 수정
- 몇 개의 컴파일 형식에서 각주, 미주 수정
- 주요 글 머리 기호 개선
- 마크다운과 팬독에 해시 들여쓰기 수준이 추가되었어요 [4241]
- RTF 변환 플래그가 없는 마크다운 출력은 굵게와 이탤릭을 변환해요 LH#3440 [4303]
- 점검도구 각주 내보내기의 모든 방법이 실패해요 [3808]
- PDF 컴파일에서 각주를 잃어요 [3851]
- 전면 문서가 컴파일 내용에서 제거되었어요. [#1623]
- RTF에 대한 미주가 기능하지 않아요 [4461]
- 컴파일 – RTF 호환성 – 각주/주석 합치기가 기능하지 않아요 [3997]
- 하위 수준의 글 머리 기호 서식을 변경하면 주요 글 머리 기호의 서식을 변경해요 [4467]
- 글 머리 기호 항목의 복사/붙이기가 글 머리 기호 들여쓰기를 깨먹어요 [4466]
- 목록 서쇼화가 플랫폼 상호간 바르게 유지되지 않아요 LH#1571 [4307]
베타 출시 후보는 2020년 4월 22일에 만료되요.
제안에 대한 안내
남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!
감사해요,
리와 티호
April 13th 2020
Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———
Current: Beta – Release Candidate 3, version 2.9.9.3
Latest Beta – Release Candidate 3 Download Link
IMPORTANT: If you use bullets heavily in your project, please backup your project before testing Scrivener Release Candidate 1.
2.9.9.3 (64-bit) | 2.9.9.3 (32-bit)
(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 44. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)
New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.
You can also use Help > Check for Updates in beta releases to download the latest beta.
System Requirements and Compatibility
- Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
- Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).
Installing 1.9.9 and 3.0 Beta Side by Side
It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.
Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.
Bug Fixes
- Footnotes, Endnotes fixes in several Compile formats
- Major bullet handling improvements
- Markdown and Pandoc added hash indentation level[4241]
- Markdown output without RTF conversion flag converts bold and italics LH#3440 [4303]
- All methods of exporting inspector footnotes fail [3808]
- PDF compile loses footnotes [3851]
- Front matter documents removed from compile contents [1623]
- Endnote output for RTF is nonfunctional [4461]
- Compile – RTF Compatibility – flatten footnotes/comments nonfunctional [3997]
- Changing a sub-level bullet style changes only the root bullet style [4467]
- Copy/Paste of bullet items breaks the bullet indentation [4466]
- List formatting not properly retained cross platform LH#1571 [4307]
Beta Release Candidate 3 expires 22nd April 2020.
A Note on Suggestions
To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!
Thanks,
Lee & Tiho
April 13th 2020