이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 44 출시 문서 에서 바뀐 것은 버그 수정 부분이네요. 이제 출시 후보라 그런지 수정되는 버그가 확연히 줄었네요.
계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.
———
현재: 베타 – 출시 후보 1, 2.9.9.1판
최신 배타 – 출시 후보 1 내려받기 연결
2.9.9.1 (64비트) | 2.9.9.1 (32비트)
(32 비트판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 베타 44를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)
새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.
베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.
시스템 요구 사항과 호환성
- Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
- 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).
1.9.9과 3.0 베타 나란히 설치하기
1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설지할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.
이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.
버그 수정
- 교차 플랫폼에서 목록 서식이 올바르게 유지되지 않아요. 몇 개의 새 글 머리 기호를 포함한 다른 목록 요소를 개선하였어요. [#1571]
- 컴파일 – 구역 배치 – 자막은 복수 요소가 추가될 때에만 보여요. [#4455]
- 컴파일 형식이 시놉시스에 대해 바르지 않은 XML 속성을 이용해요. [#4456]
- 출력 여백 문제에 대한 출력과 컴파일. [#4216]
- 전면 문서가 컴파일 내용에서 제거되었어요. [#1623]
- Qt PDFs이 페이지를 가로지르는 줄 높이를 나누어, 바르지 않은 들여쓰기 가 계산되요. [#1915]
- 개요자 부르기 최적화. 개요자 상태가 창 배열에서 바르게 저잠되거나/복원되지 않아요. [#4447]
- 충돌한 .scrivx 바인더가 보이지 않아요. [#4437]
- Qt PDF 컴파일이 양쪽 정렬에 대해 오른쪽 면을 잘라내요. [#1523]
- 맞춤법 제안 순서를 개선하였어요. [#4448]
베타 출시 후보 1은 2020년 4월 14일에 만료되요.
제안에 대한 안내
남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!
감사해요,
리와 티호
2020년 4월 6일
Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———
Current: Beta – Release Candidate 1, version 2.9.9.1
Latest Beta – Release Candidate 1 Download Link
2.9.9.1 (64-bit) | 2.9.9.1 (32-bit)
(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 44. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)
New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.
You can also use Help > Check for Updates in beta releases to download the latest beta.
System Requirements and Compatibility
- Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
- Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).
Installing 1.9.9 and 3.0 Beta Side by Side
It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.
Bug Fixes
- List formatting not properly retained cross platform. Other list item improvements, including few new bullets. [#1571]
- Compile – Section Layouts – subtitles should only appear with plural elements added. [#4455]
- Compile formats use incorrect XML attribute for synopses setting. [#4456]
- Print and Compile for Print Margin Issues. [#4216]
- Front matter documents removed from compile contents. [#1623]
- Qt PDFs split line height across pages, incorrect indent calculation. [#1915]
- Outliner loading optimizations. Outliner states are not stored/restored properly from Window Layouts. [#4447]
- Conflicted .scrivx binders not shown. [#4437]
- Qt PDF compile cuts off right edge for justified alignment. [#1523]
- Improve the Spelling Suggestions order. [#4448]
Beta Release Candidate 1 expires 14th April 2020.
A Note on Suggestions
To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!Thanks,
Lee & Tiho
April 6th 2020