윈도우즈용 Scrivener 3.0 베타 36 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 35 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 36 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 36, 2.9.0.36판

내려받기 링크

2.9.0.36 (64비트) | 2.9.0.36 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 36를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설지할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 35에서 베타 36으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 맥과 일치하도록 문서 기능을 끌어서 놓기 [4268]
  • 맥과 일치하도록 스크립트 작성 설정, 파일 형식 및 GUI [4282]
  • 스크립트 작성 간격 수정 및 기능 키 수정
  • 맥 작업에서 BBC 라디오 장면 요소가 손실 됨 [4256]
  • Windows에서 Stage Play US 요소가 인식되지 않음 [4278]
  • 맥에서 BBC 녹화 드라마 캐릭터 요소가 손실 됨 [4263]
  • RTF에서 스크립트 요소에 대한 스타일로 스크립트 스타일 내보내기 구현
  • 프로젝트 컴파일 설정이 존재하는 경우에만 레거시 컴파일 설정 가져 오기 대화 상자 자동 열기 [4284]
  • “Tufte (도서)” MMD > LaTex 문서 클래스 추가 [4277]
  • LaTeX 선택지 “이용자 정의” 설정은 새로운 MMD6 명명 규칙을 사용해야해요 [4028]
  • MMD 출력 디렉토리가 이제 맥 사양에 따라 생성되요.
  • Pandoc / Latex 형식 내보내기
  • 마크 다운 컴파일 폴더 생성과 재사용 [3451]
  • 서식 재지정이 이제 맥 사양과 일치
  • 섹션 배열 > 제목 옵션에 배치 된 경우 자리 표시자가 처리되지 않음 [4238]
  • 대소 문자 자리 표시자가 이제 올바르게 교체되었어요.
  • <$parentposition> 자리 표시자가 컴파일 대체에서 무시 됨 [4276]
  • 본문 내에서 작업 교체가 실패 함 [4271]
  • 첫 줄 들여쓰기 기능 평탄화 맥 사양과 일치하지 않음
  • 파란색 바인더 헤더와 밑줄은 별도의 상태를 나타내야만 해요 [2737]
  • 아포스트로피 처리에 대한 맞춤법 검사 문제 [3459]
  • 스마트 구두점을 멍청이 설정으로 변환해도 저장되지 않음 [4250]
  • 갱신 된 파일을 동기화 한 후 갱신 된 문서 모음이 비어 있음 [2387]
  • 바닥글의 단어/문자 유형 변경 지연 [4270]
  • 빈 개요자에서 새 항목을 만들 수 없음 [4203]
  • 파일 -> 인쇄와 파일-> 인쇄 미리보기로 인해 충돌이 발생 함 [4262]
  • 컴파일 교체 성능이 크게 향상되었어요

베타 36은 2020 년 2 월 중순에 만료됩니다.

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 1 월 28 일

원문

Scrivener 3.0 Beta 36 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 36, version 2.9.0.36

Download Link

2.9.0.36 (64-bit) | 2.9.0.36 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 36. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 35 to Beta 36 are listed below.

Bug Fixes

  • Invert drag and drop of a document functionality to match Mac [4268]
  • Overhaul Scriptwriting settings, file format and GUI to match Mac [4282]
  • Scriptwriting spacing fixes and functional key fixes
  • BBC Radio Scene element lost from Mac project [4256]
  • Stage Play US elements not recognized on Windows [4278]
  • BBC Taped Drama Character element lost from Mac [4263]
  • Implement Compile Styles export for Script Elements as styles in RTF
  • Auto-Open the legacy compile setting import dialog only if project compile settings exist [4284]
  • Add the “Tufte (Book)” MMD > LaTex document class [4277]
  • LaTeX Options “Custom” setting should make use of new MMD6 naming convention [4028]
  • MMD output directory now created according to Mac specification
  • Pandoc/Latex styles export
  • Markdown Compile folder generation and reuse [3451]
  • Styles override now matches Mac specification
  • Placeholders not handled if placed in Section Layout > Title Options [4238]
  • Mixed-case placeholders now correctly replaced
  • <$parentposition> placeholder ignored in compile replacements [4276]
  • Project Replace fails within main text [4271]
  • Flatten first line-indent functionality no matches Mac specification
  • Blue binder header and underline should indicate separate states [2737]
  • Spell Check issues handling apostrophes [3459]
  • Convert smart punctuation to dumb setting doesn’t save [4250]
  • Updated Documents collection empty after syncing updated files [2387]
  • Delay changing word/char type option in footer [4270]
  • Cannot create new items in empty outliner [4203]
  • File->Print and File->Print Preview will cause a crash [4262]
  • Compile replacement performance significantly improved

Beta 36 expires mid- Feb 2020.

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Jan 28th 2020

윈도우즈용 Scrivener 3.0 베타 35 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 34 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 35 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 35, 2.9.0.35판

내려받기 링크

2.9.0.35 (64비트) | 2.9.0.35 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 35를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 34에서 베타 35으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 스크리브너 1판의 컴파일 사전설정 가져오기를 추가하였어요(출시 준비) [4266]
  • 파일 -> 인쇄와 파일 -> 인쇄 미리보기로 인해 충돌이 발생 해요 [4262]
  • 컴파일 – 구역 배치 – 오른쪽 페이지 / 왼쪽 페이지가 저장되지 않아요 [4224]
  • 작성 모드에서 서식에 액세스 할 수 없어요 [2805]
  • 일부 옵션 변경에서 “스크리브너를 다시 시작해야 합니다” 메시지가 불필요하게 표시되요 [3812]
  • 이름이 같은 서식을 컴파일하면 서식 충돌이 발생해요. [4180]
  • 빈 개요자에서 새 항목을 만들 수 없어요 [4203]
  • 컴파일에서 MMD 변환 출력이 작동하지 않아요. [4206]
  • 맥 RTF 작업 파일을 읽을 때 기본 본문 편집기 문자 색상이 고려되지 않아요 [4213]
  • 컴파일 형식에서 일부 “전처리” 태그 읽기 / 쓰기 [4223]
  • 컴파일 대화 상자를 다시 열면 마지막 메인 컴파일 창이 기억되요
  • 옵션 대화 상자를 다시 열면 마지막 옵션 창이 기억됩니다
  • 개요자 그리고 또는 Corkboard에서 단일 문서 선택을 통해 새 하위 항목 생성해요 [#4203]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 1 월 19 일

원문

Scrivener 3.0 Beta 35 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 35, version 2.9.0.35

Download Link

2.9.0.35 (64-bit) | 2.9.0.35 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 35. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 34 to Beta 35 are listed below.

Bug Fixes

  • Added Import Scrivener v1 Compile Presets (Release Preparation) [4266]
  • File->Print and File->Print Preview causes a crash [4262]
  • Compile – Section Layout – recto/verso not saved [4224]
  • Styles inaccessible in Composition Mode [2805]
  • “Scrivener needs to be restarted” message shown unnecessarily from some Options changes [3812]
  • Compile formats with same name results in format collisions [4180]
  • Cannot create new items in empty outliner [4203]
  • None of the MMD conversion outputs are working in compile [4206]
  • Default text editor text color is not taken into account when reading Mac RTF project files [4213]
  • Read/Write some “PostProcessing” tags from the compile format [4223]
  • Last main Compile pane is remembered when re-opening Compile dialog
  • Last Options pane is remembered when re-opening the Options dialog
  • Allow single document selection in Outliner and or Corkboard to create new subitems [#4203]

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Jan 19th 2020

윈도우즈용 Scrivener 3.0 베타 34 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 33 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 34 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 34, 2.9.0.34판

내려받기 링크

2.9.0.34 (64비트) | 2.9.0.34 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 34를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2020년 1월 20일까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 33에서 베타 34으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 구역 배치 > 제목 옵션에 자리배치자가 있는 경우 처리되지 않아요 [4238]
  • 작업 검색에서 올바른 기초 자료 결과를 반환하지 않아요 [4234]
  • 작업 교체 후 문자가 사라지고 변경 사항이 저장되지 않아요 [4231]
  • 문자 형식으로 이미지를 복사 / 붙여 넣기하면 붙여 넣은 문자 끝에 마크 업 태그가 남아요. [4237]
  • 개행 전에 종료되는 문자 서식은 연속된 개행을 소멸해요 [3492]
  • 왼쪽 / 오른쪽으로 이동하면 목록 항목을 들여 써야 해요 [4233]
  • MMD-ODT의 중복 형식을 편집 할 때 컴파일 설정이 손실되요 [4227]
  • 대체용 대소 문자 구분 플래그가 적용되지 않아요. [4226]
  • 빠른 검색과 결과의 UI를 추가로 개선했어요 [2453]
  • 사용설명서 내용을 갱신하였어요
  • 구역 배치에 지정된 서식 할당은 플랫폼 간 호환이 되지 않아요 [4190]
  • 작업을 다시 연 후 축소된 관리자 창이 확대되요 [3754]
  • 작업 설정 배경 이미지 기본 배경에서 오타 [4235]
  • 빠른 참조 창에서 마우스 확대축사가 작동하지 않아요 [4207]
  • 바인더 아웃 라이너에서의 펼치기 / 접기 조정 [3692]
  • RTF / DOC / DOCX / PDF의 <$ BLANK_PAGE> 자리 표시자 수정 [4232]
  • 자동 백업에 대한 확장자 .bak 를 -bak로 변경 [4230]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 1 월 14 일

원문

Scrivener 3.0 Beta 34 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 34, version 2.9.0.34

Download Link
2.9.0.34 (64-bit) | 2.9.0.34 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 34. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side
It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 33 to Beta 34 are listed below.

Bug Fixes

  • Implemented RegExp2 throughout Scrivener [1443]
  • <$pagecount> always ‘-1’ in PDF compile [4215]
  • Quick Search and results UI consistent with Mac 2453]
  • Read/Write some “PostProcessing” tags from the compile format to preserve Mac content [4223]
  • Compile – Section Layout – recto/verso not saved [4224]
  • Extension field in plain-text compiler format designer does not function [3864]
  • Format bar Styles box has non-native scrollbars [4217]
  • Style box backgrounds work better with themes [4197]
  • Compile styles and styled section layout refinements
  • Compile replacements improvements
  • Bullet list refinements
  • Scrivener overall performance improvements

A Note on Suggestions
To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Jan 9th 2020

윈도우즈용 Scrivener 3.0 베타 33 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 32 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 33 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 33, 2.9.0.33판

내려받기 링크

2.9.0.33 (64비트) | 2.9.0.33 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 33를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 불러집니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2020년 1월 20일까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 32에서 베타 33으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 수정

  • 스크리브너 전체에서 RegExp2 구현하였어요 [1443]
  • PDF 컴파일에서 <$pagecount>가 항상 ‘-1’ [4215]
  • 맥과 일치하는 빠른 검색과 결과 이용환경 [2453]
  • 맥 내용물을 보존하기 위한 컴파일 형식에서 일부 “사전처리” 태그를 읽기/쓰기 [4223]
  • 컴파일 – 구역 배치 – 오른쪽 페이지 / 왼쪽 페이지가 저장되지 않음 [4224]
  • 일반 문서 컴파일러 형식에서 확장 항목이 기능하지 않음 [3864]
  • 서식 막대 양식 상자에 기본이 아닌 스크롤 막대가 있어요. [4217]
  • 양식 상자 배경은 테마와 더 잘 작동해요 [4197]
  • 컴파일 양식과 양식 있는 구역 배치를 개선했어요
  • 컴파일 대체를 개선했어요
  • 글 머리 기호 목록을 개선했어요
  • 스크리브너 전체 성능을 개선했어요

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2020 년 1 월 9 일

원문

Scrivener 3.0 Beta 33 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 33, version 2.9.0.33

Download Link
2.9.0.33 (64-bit) | 2.9.0.33 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 33. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side
It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 32 to Beta 33 are listed below.

Bug Fixes

  • Implemented RegExp2 throughout Scrivener [1443]
  • <$pagecount> always ‘-1’ in PDF compile [4215]
  • Quick Search and results UI consistent with Mac 2453]
  • Read/Write some “PostProcessing” tags from the compile format to preserve Mac content [4223]
  • Compile – Section Layout – recto/verso not saved [4224]
  • Extension field in plain-text compiler format designer does not function [3864]
  • Format bar Styles box has non-native scrollbars [4217]
  • Style box backgrounds work better with themes [4197]
  • Compile styles and styled section layout refinements
  • Compile replacements improvements
  • Bullet list refinements
  • Scrivener overall performance improvements

A Note on Suggestions
To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Jan 19th 2020

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept
Privacy Policy