윈도우즈용 Scrivener 3.0 베타 32 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 31 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 32 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 32, 2.9.0.32판

내려받기 링크

2.9.0.32 (64비트) | 2.9.0.32 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 32를 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 파일 > 옵션의 버튼을 누린 다음 새로 설치한 후 다시 로드됩니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2020년 1월 20일까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 31에서 베타 32으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 고침

  • 보기 > “라벨 색상 사용” 문제 [4199]
  • 커리어 프라임의 변형 갱신 [4212]
  • Mac RTF 작업 파일을 읽을 때 기본 글자 편집기 글자 색상이 고려되지 않아요 [4213]
  • 개정 모드 추가 맥-윈 호환성 [1814]
  • <img… src = 속성이 없는 HTML 태그는 Scrivener를 차단할 거에요 [4208]
  • 컴파일에서 MMD 변환 출력이 작동하지 않음 [4206]
  • 빠른 참조 창에서 마우스 줌이 작동하지 않음 [4207]
  • 새 줄 앞의 문자 서식 중단(현상)이 연속 새줄을 소멸시킴 [3492]
  • 작업 설정 대화 상자 크기 [3312]
  • 접힌 점검도구 영역이 작업 다시 열고 난 뒤에 커져 있음 [3754]
  • 빈 개요자에 새로운 항목을 생성할 수 없음 [4203]
  • 일부 설정 변경에서 “스크리브너가 재시작되어야 할 필요가 있습니다”가 불필요하게 보여짐 [3812]
  • 일부 서식 상자에서 기본 문자 색상이 일부 색상 테마에서 읽을 수 없음 [4197]
  • Windows 3 용 Scrivener에 대한 자습서 업데이트 [3848]
  • 환경설정에서 표시와 출력 글꼴을 보여주기 추가 [4159]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019 년 12 월 21 일

원문

Scrivener 3.0 Beta 32 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 32, version 2.9.0.32

Download Link

2.9.0.32 (64-bit) | 2.9.0.32 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 32. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta expires end of Jan 20th 2020. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility
  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).
Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 31 to Beta 32 are listed below.

Bug Fixes
  • View > “Use Label Color In” issues [4199]
  • Update variant of Courier Prime [4212]
  • Default text editor text color is not taken into account when reading Mac RTF project files [4213]
  • Revision mode further Mac-Win compatibility [1814]
  • Html with an <img… tag but without an src= attribute will block Scrivener [4208]
  • MMD conversion outputs not working in compile [4206]
  • Mouse Zoom doesn’t work in Quick Reference Window [4207]
  • Character styles terminating before newline consume sequential newlines [3492]
  • Project Settings Dialog Size [3312]
  • Collapsed inspector pane enlarged after project reopened [3754]
  • Cannot create new items in empty outliner [4203]
  • “Scrivener needs to be restarted” shown unnecessarily from some Options changes [3812]
  • The default text color in some style boxes is unreadable in some color Themes [4197]
  • Tutorial updates for Scrivener for windows 3 [3848]
  • Add Display and Print font hinting preferences [4159]
A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Dec 21st 2019

윈도우즈용 Scrivener 3.0 베타 31 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 30 출시 문서 에서 바뀐 것은 버그 수정 부분이네요.

Scrivener 3.0 베타 31 (내려받기 링크와 변경 목록)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타판을 내려받으시거나 보고서를 게시하지 말아주세요.

현재: 베타 31, 2.9.0.31판

내려받기 링크

2.9.0.31 (64비트) | 2.9.0.31 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 판은 C:\Program Files\Scrivener에 설치되요. 베타 31을 설치하기 전에 이전 베타판을 제거했는지 확인하세요. 원하는 경우 파일 > 옵션에 있는 “관리 …” 단추를 통해 프로그램 기본 설정을 먼저 저장할 수 있어요. 그런 다음 새로 설치한 후 다시 로드됩니다. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 12월 말까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9과 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 작업에 접근하기 위해 Scrivener 안에 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 30에서 베타 31으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

버그 고침

  • MMD 대화 출력 중 어느것도 컴파일에서 작동하지 않음 [4206]
  • 빠른 참조 창에서 마우스 줌이 작동하지 않음 [4207]
  • “라벨에 색상 사용” 문제 [4199]
  • 일부 설정 변경에서 “스크리브너가 재시작되어야 할 필요가 있습니다”가 불필요하게 보여짐 [3812]
  • 일부 서식 상자에서 기본 문자 색상이 일부 색상 테마에서 읽을 수 없음 [4197]
  • 윈도우용 스크리브너 3을 위한 자습서 생성 [3848]
  • 환경설정에서 표시와 출력 글꼴을 보여주기 추가 [4159]
  • 윈시 마크업으로 취급 개선됨
  • 다중 단계 목록 항목과 중첩 목록이 이제 원하는만큼 html과 ePub으로 내보내짐
  • 이미 파일 이름으로 존재하는 경우 MMD 컴파일러에 확인 메시지가 추가됨
  • MMD에서 라텍스로 (변환이) 개선됨

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019년 12월 12일

원문

Scrivener 3.0 Beta 31 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 31, version 2.9.0.31

Download Link

2.9.0.31 (64-bit) | 2.9.0.31 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 31. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta expires end of December 2019. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 30 to Beta 31 are listed below.

Bug Fixes

  • None of the MMD conversion outputs are working in compile [4206]
  • Mouse Zoom doesn’t work in Quick Reference Window [4207]
  • Html with an <img… tag but without an src= attribute will block Scrivener [4208]
  • Major over haul to revision mode to work with Mac Scrivener and more sophisticated outputs such as Word & Open Office Support [1814]
  • Character styles terminating before newline consume sequential newlines [3492]
  • Project Settings Dialog Size left area adjusted [3312]
  • Collapsed inspector pane enlarged after project reopened [3754]
  • Cannot create new items in empty outliner [4203]
  • View > “Use Label Color In” issues [4199]
  • “Scrivener needs to be restarted” shown unnecessarily from some Options changes [3812]
  • The default text color in some style boxes is unreadable in some color Themes [4197]
  • Create Tutorial for Scrivener for windows 3 [3848]
  • Add Display and Print font hinting preferences [4159]
  • Treat as raw markup implemented
  • Multi level list items and nested lists now export to html and ePub as expected
  • Added confirmation message to MMD compiler if previous file name exits
  • MMD to Latex implemented

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Dec 12th 2019

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept
Privacy Policy