윈도우즈용 Scrivener 3.0 베타 26 출시 문서

이 문서는 공식 번역이 아니라는 사실을 밝혀둡니다. 다소 오류가 있을 수도 있으니 감안하시고 확인하시기 바랍니다. 윈도우즈용 Scrivener 3.0 베타 25 출시 문서 에서 바뀐 것은 개선과 버그 수정 부분이네요.

스크리브너 3.0 베타 26 (링크 및 변경 목록 다운로드)

계속 진행하기 전에, 이 글타래에 대한 첫 번째 댓글의 Windows 3.0 베타와 버그 보고에 대한 일반 정보를 참조하세요. 해당 정보를 읽을 때까지 지금의 베타 버전을 내려받으시거나 보고서를 게시하지 말아주세요.

현재 : 베타 26, 2.9.0.26판

내려받기 링크

2.9.0.26 (64비트) | 2.9.0.26 (32비트)

(32 비트 판은 기본적으로 관리자 계정의 C:\Program Files (x86)\Scrivener에 설치되고 64 비트 버전은 C:\Program Files\Scrivener에 설치되요. 베타 26을 설치하기 전에 이전 베타 버전을 제거했는지 확인하세요. 원하는 경우 “관리 …”를 통해 프로그램 기본 설정을 먼저 저장할 수 있습니다. 파일> 옵션 버튼을 클릭 한 다음 새로 설치 한 후 다시부르기하십시오. 베타판 사이의 변화가 설정을 복원하는 것에 영향을 줄 수 있다는 사실을 명심하시고, 만약 이상한 문제가 발생하면, 기본값으로 재설정하시기 바래요.)

이 베타는 2019년 10월 말까지만 실행될 거에요. 새로운 잠정적 베타는 여기에 게시될 거에요; 당신이 가장 최신 판을 사용하고 있는지 도움말 > Scrivener에 대하여를 확인해주시기 바래요. 새 베타 판이 출시 될 때 알림을 받기 위해 이 쟁점을 구독 할 수 있어요.

베타 판에서 최신 베타 판을 내려받기 위해 도움말 > 업데이트 확인을 사용할 수 있어요.

시스템 요구 사항과 호환성

  • Scrivener 3에는 .NET v4.6.2 또는 그 이상의 버전이 설치된 Windows 7 또는 이상이 필요해요.
  • 갱신된 Scrivener 3의 파일 형식은 Scrivener 1(또는 맥에서 Scrivener 2)와 호환되지 않아요. 당신이 스크리브너 1의 작업을 스크리브너 3에서 열었을 때, 귀하는 작업을 갱신할 것인지 질문받게 되요. 이후에는 스크리브너 1에서 열 수 없게 되요(갱신되기 전에 백업이 만들어지기는 하지만요).

1.9.9와 3.0 베타 나란히 설치하기

1.9.9와 Scrivener 3.0 베타 둘 모두 동시에 설치할 수 있어요, 하지만 당신은 설치 진행 중에 다른 위치를 선택해야만 해요(예. 기본 “Scrivener” 폴더 이름을 “Scrivener3”으로 변경). 우리는 Scrivener 3을 설치하기 전에 새로운 설치가 그것을 덮어쓰는 것을 방지하게 위해 1.9.9의 바로가기의 이름을 변경하실 것을 권장해요.

이 시점에서 알아두셔야 할 것은, 가장 최근의 설치된 Scrivener 판이 윈도우즈 프로그램 목록에서 보일 것이고, 작업 파일에서 두번 누르시면 그 판에서 열기를 시도할 것이라는 거에요. 당신은 작업 파일 아이콘을 당신이 원하는 판의 적절한 앱 아이콘에 끌어 놓거나 파일 > 열기를 사용하시는 것으로 대신 할 수 있어요.

베타 25에서 베타 26으로의 수정 사항과 변경 사항은 아래에 나열되었어요.

개선과 버그 수정

  • 빈 작업을 컴파일할 때 스크리브너 충돌 [4065]
  • 컴파일 시 전자책에 점검도구의 주석과 각주를 내보내기 [4061]
  • 컴파일 시 어도비 디지털 에디션에서 ePub 목차 [178]
  • 컴파일 시 전환 컴파일 창에서 대부분의 기능이 여전히 작동하지 않음 [3926]
  • 컴파일 시 형식 구축에서 파일 형식의 분류를 Alt 누르기로 전환하기 [3981]
  • 언제나 삽입 모드로 시작(덮어쓰기 모드 아님) [4073]
  • “I.e”에서 “i.e.”로 자동 대문자화 자동 수정 [4075]
  • 작업 간 책갈피를 문서에 끌어서 놓기 [4074]
  • 작업 책갈피가 선택된 하위메뉴 바인더 항목에서 목록을 채우지 않음 [3250]
  • 내부 백링크 기능 구현 [3563]
  • 이름표에 따라 코르크판 카드 크기를 바꾸는 것을 허용하지 않음 [4064]
  • 겹치기 모드가 기능하지 않음 [4062]
  • 기본 문자 확대가 이미 있는 편집기에 영향을 주지 않음 [3905]
  • 점검도구 책갈피 배경이 테마에 따라 바뀌지 않음 [4071]
  • 이름 생성기 – 충돌 [4070]
  • 이름 생성기 이용자 정의된 이름목록의 가져오기와 지우기를 구현하였어요
  • 편집기 기본을 사용하는 문서에 강조하기와 색상 서식화 [4069]

제안에 대한 안내

남겨진 버그 해결을 도우시려면, 베타 포럼 게시물이 버그 보고 또는 베타로 작업하는 것에 대한 질문에 전념해 주시면 감사하겠어요. 인터페이스 또는 기능적인 제안은 Scrivener의 일반 희망목록 포럼에 게시하시기 바랍니다. 이 중 대부분은 윈도우즈와 맥OS의 디자인에 영향을 미치기 때문입니다. 감사해요!

감사해요,
리와 티호
2019년 10월 17일

원문

Scrivener 3.0 Beta 26 (Download Links & Change List)

Before proceeding, please see the general notes about the Windows 3.0 beta and reporting bugs in the first reply to this thread. Please do not download the current beta or post reports until you have read that information.
———

Current: Beta 26, version 2.9.0.26

Download Link

2.9.0.26 (64-bit) | 2.9.0.26 (32-bit)

(The 32-bit version installs by default to C:\Program Files (x86)\Scrivener on administrator accounts; the 64-bit version installs to C:\Program Files\Scrivener. Please be sure to uninstall previous betas before installing Beta 26. If you wish, your program preferences can be saved first via the “Manage…” button in File > Options, then reloaded after the fresh installation. Bear in mind that changes between betas may affect restoring settings, and if you are experiencing oddities, please try resetting to the defaults.)

This beta will run through to end of October 2019. New interim betas will be posted here; please check Help > About Scrivener to ensure you are using the most recent version. You can subscribe to this topic to get notifications when new betas are released.

You can also use Help > Check for Updates in beta releases to download the latest beta.

System Requirements and Compatibility

  • Scrivener 3 requires Windows 7 or above with .NET v4.6.2 or higher.
  • Scrivener 3’s file format has been updated and is not backwards-compatible with Scrivener 1 (or Scrivener 2 on macOS). When you open a Scrivener 1 project in Scrivener 3, you will be prompted to update the project, after which you will not be able to open it in Scrivener 1 (although a backup will be made before the update).

Installing 1.9.9 and 3.0 Beta Side by Side

It is possible to have both 1.9.9 and the Scrivener 3.0 beta installed simultaneously, but you will need to choose a different location during the installation process (e.g. change the default “Scrivener” folder name to “Scrivener3”). We suggest also changing the name of 1.9.9 shortcuts before installing Scrivener 3 to prevent the new installation overwriting them.

Please note that at this time, only the most recently installed Scrivener version will appear in the Windows Programs list, and double-clicking a project file will attempt to open it in that version. You can instead drag the project file icon onto the appropriate app icon for the version you want or use File > Open… within Scrivener to access the project.

The fixes and changes from Beta 25 to Beta 26 are listed below.

Implementions and Bug Fixes

  • Compiling Blank Project Crashes Scrivener [4065]
  • Compile Export Inspector comments and footnotes to eBooks [4061]
  • Compile ePub TOC in Adobe Digital Editions [178]
  • Compile most functions in the Transformations compile pane are still nonfunctional [3926]
  • Compile Alt-clicking to toggle categories of file types in Format design [3981]
  • Always start in insert mode(not overwrite) [4073]
  • Autofix auto-capitalized “I.e.” into “i.e.” [4075]
  • Drag and drop documents into Bookmarks between projects [4074]
  • Project Bookmarks not filling lists in binder item selection submenus [3250]
  • Implement internal back-link capability [3563]
  • Corkboard arrange by Labels does not allow changing the card size [4064]
  • Overtype mode is not functional [4062]
  • Default text zoom affecting existing editors [3905]
  • Inspector Bookmarks background does not change with Themes [4071]
  • Name Generator – Crash [4070]
  • Name Generator implemented import and delete of user defined namelists
  • Notes using editor default formatting highlight and text colour [4069]

A Note on Suggestions

To help resolve remaining bugs, we’d appreciate keeping the beta forum posts dedicated to bug reports or questions on working with the beta. Suggestions for the interface or functionality should instead be posted in Scrivener’s general wishlist forum, since most of these affect the design for both Windows and macOS. Thank you!

Thanks,
Lee & Tiho
Oct 17th 2019

답글 남기기

이메일 주소는 공개되지 않습니다. 필수 필드는 *로 표시됩니다

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept
Privacy Policy